Skip to content
Sudonix

Mongodb or Redis

General
  • Madchatthewundefined

    @phenomlab Nice! I will try it tonight and let you know how it goes.

    1
  • Madchatthewundefined

    So I tried several times to get Mongodb running on Arch but to no avail. I was able to install redis and get a nodebb instance setup and even proxied through nginx. And as expected, Nodebb is just superfast. I like how you don’t have to mess with making sure the proper php extensions are installed and make sure that path is entered in and all that jazz. It is nice to install it and it just works.

    I will have to keep attempting to install mongodb on Arch. Then I can use them both for Nodebb.

    0
  • phenomlabundefined

    @Madchatthew did you get any specific error message when trying to compile?

    Perhaps try this

    https://ivansaul.gitbook.io/blog/how-to-install-mongodb-on-arch-linux

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab I am going to install it again here and I will post the error that I received.

    0
  • Madchatthewundefined

    I used these instructions to install mongodb
    https://www.geeksforgeeks.org/how-to-install-mongodb-on-arch-based-linux-distributionsmanjaro/

    This is what I see when I use ‘sudo systemctl status mongodb’ after starting the mongodb service
    image.png

    I rebooted the server and the results were the same after rebooting the server.

    Here is the status in text form to make for easier searching.

    × mongodb.service - MongoDB Database Server
     Loaded: loaded (/usr/lib/systemd/system/mongodb.service; disabled; preset: disabled)
     Active: failed (Result: core-dump) since Sat 2024-08-10 16:45:00 CDT; 1s ago
   Duration: 945ms
 Invocation: a849587148c548f6a89a72bc53aacb48
       Docs: https://docs.mongodb.org/manual
    Process: 704 ExecStart=/usr/bin/mongod --config /etc/mongodb.conf (code=dumped, signal=ILL)
   Main PID: 704 (code=dumped, signal=ILL)
   Mem peak: 56.5M
        CPU: 148ms

Aug 10 16:44:59 morecowbell.lan systemd[1]: Started MongoDB Database Server.
Aug 10 16:45:00 morecowbell.lan systemd[1]: mongodb.service: Main process exited, code=dumped, status=4/ILL
Aug 10 16:45:00 morecowbell.lan systemd[1]: mongodb.service: Failed with result 'core-dump'.
    0
  • Madchatthewundefined

    Process: 704 ExecStart=/usr/bin/mongod --config /etc/mongodb.conf (code=dumped, signal=ILL)

    I think the signal=ILL in the highlighted text means that it isn’t compatible with the OS after doing some searching.

    0
  • phenomlabundefined

    @Madchatthew not sure about the incompatibility, but did find this

    https://www.mongodb.com/community/forums/t/setting-up-mongodb-v5-0-on-ubuntu-20-core-dump-status-4-ill/120705

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab Yeah I found this one too that says the same thing. When I do the command to see if avx is on there, it doesn’t show anything. Also, my computer is 10 years old.

    https://superuser.com/questions/1814515/mongodb-error-failed-with-result-core-dump

    0
  • Madchatthewundefined

    I was able to figure it out with the help of this stackoverflow post linked below. Following these instructions I was able to get mongodb running and avx showed up in the cpu info. So I have this setup in virtualbox so on a hosted server, hopefully this wouldn’t be an issue, but if anyone else runs across this, hopefully it helps.

    To summarize the instructions:

Open a Command Prompt in Windows Host as Administrator.

Find the Command Prompt icon and right-click. Choose Run As Administrator.
Disable Hypervisor lunch

bcdedit /set hypervisorlaunchtype off

Disable Microsoft Hyper-V

DISM /Online /Disable-Feature:Microsoft-Hyper-V

Shutdown quick shutdown -s -t 2

Wait a few seconds before turn it on.

    https://stackoverflow.com/questions/65780506/how-to-enable-avx-avx2-in-virtualbox-6-1-16-with-ubuntu-20-04-64bit

    1
  • Madchatthewundefined

    Now the text task will be to migrate data from Redis to Mongodb and setup the multithread that @phenomlab has setup for this site.

    1
  • Madchatthewundefined

    @phenomlab how do you have it setup to have this sight start up automatically if the server gets rebooted? I attempted to follow nodebb’s instructions but can’t seem to get the systemd nodebb.service instructions to work. I have also tried a few others that I googled for and it just doesn’t seem to want to run as a service.

    0
  • phenomlabundefined

    @Madchatthew can you post the configuration you have for the service?

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab

    This is the Nginx conf file

    upstream io_nodes {
        ip_hash;
        server 127.0.0.1:4567;
        server 127.0.0.1:4568;
        server 127.0.0.1:4569;
}

server {

        listen 80;
        server_name nodebb.lan;
        root /home/nodebb/public_html;
        index index.php index.html index.htm;

        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_set_header Host $http_host;
        proxy_set_header X-NginX-Proxy true;
        proxy_redirect off;

        # Socket.IO Support
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";

        location @nodebb {
                proxy_pass http://io_nodes;
        }

        location ~ ^/assets/(.*) {
                root /home/nodebb/public_html/;
                try_files /build/public/$1 /public/$1 @nodebb;
        }

        location / {
                proxy_pass http://io_nodes;
        }
}

    This is the current nodebb.service file

    [Unit]
Description=NodeBB forum for Node.js.
Documentation=http://nodebb.readthedocs.io/en/latest/
After=system.slice multi-user.target

[Service]
Type=simple
User=nodebb

StandardOutput=syslog
StandardError=syslog
SyslogIdentifier=nodebb

Environment=NODE_ENV=production
WorkingDirectory=/home/nodebb/public_html/

# Call with exec to be able to redirect output: http://stackoverflow.com/a/33036589/1827734
ExecStart=/usr/bin/node /home/nodebb/public_html/loader.js
Restart=on-failure

[Install]
Alias=forum
WantedBy=multi-user.target

    I started with this code and the above code is from a google search. This code below, I did also try it with the correct path for node.

    [Unit]
Description=NodeBB
Documentation=https://docs.nodebb.org
After=system.slice multi-user.target mongod.service

[Service]
Type=forking
User=nodebb

WorkingDirectory=/path/to/nodebb
PIDFile=/path/to/nodebb/pidfile
ExecStart=/usr/bin/env node loader.js --no-silent
Restart=always

[Install]
WantedBy=multi-user.target

    The “/usr/bin/env node” is where node is located that I found from using a command.
    I also get a 502 Bad Gateway when I start either ./nodebb start or node loader.js.

    When I do “sudo systemctl status nodebb” after using “sudo systemctl start nodebb”, I get the following.

    ○ nodebb.service - NodeBB forum for Node.js.
     Loaded: loaded (/etc/systemd/system/nodebb.service; disabled; preset: disabled)
     Active: inactive (dead)
       Docs: http://nodebb.readthedocs.io/en/latest/

Aug 11 20:53:16 morecowbell.lan systemd[1]: /etc/systemd/system/nodebb.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
Aug 11 20:53:16 morecowbell.lan systemd[1]: /etc/systemd/system/nodebb.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
Aug 11 20:53:16 morecowbell.lan systemd[1]: Started NodeBB forum for Node.js..
Aug 11 20:53:16 morecowbell.lan nodebb[2605]: Process "1298" from pidfile already running, exiting
Aug 11 20:53:16 morecowbell.lan systemd[1]: nodebb.service: Deactivated successfully.
Aug 11 20:53:24 morecowbell.lan systemd[1]: /etc/systemd/system/nodebb.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
Aug 11 20:53:24 morecowbell.lan systemd[1]: /etc/systemd/system/nodebb.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.

    Sorry this post is so long and thank you for your help.

    Update: I just ran the status for nginx and received the below. So the 192.168.1.10 is my windows PC and the connection was refused. Would I need to add the port to ufw in order for this to work, or is this a different issue.

    Aug 11 20:49:54 morecowbell.lan nginx[576]: 2024/08/11 20:49:54 [error] 576#576: *1 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4568/", host: "nodebb.lan"
Aug 11 20:49:54 morecowbell.lan nginx[576]: 2024/08/11 20:49:54 [error] 576#576: *1 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4569/", host: "nodebb.lan"
Aug 11 20:49:54 morecowbell.lan nginx[576]: 2024/08/11 20:49:54 [error] 576#576: *1 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4567/", host: "nodebb.lan"
Aug 11 20:49:55 morecowbell.lan nginx[576]: 2024/08/11 20:49:55 [error] 576#576: *1 no live upstreams while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET /favicon.ico HTTP/1.1", upstream: "http://io_nodes/favicon.ico", host: "nodebb.lan", referrer: "http://nodebb.lan/"
Aug 11 20:51:57 morecowbell.lan nginx[577]: 2024/08/11 20:51:57 [error] 577#577: *6 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4568/", host: "nodebb.lan"
Aug 11 20:51:57 morecowbell.lan nginx[577]: 2024/08/11 20:51:57 [error] 577#577: *6 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4569/", host: "nodebb.lan"
Aug 11 20:51:57 morecowbell.lan nginx[577]: 2024/08/11 20:51:57 [error] 577#577: *6 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:4567/", host: "nodebb.lan"
Aug 11 20:51:57 morecowbell.lan nginx[577]: 2024/08/11 20:51:57 [error] 577#577: *6 no live upstreams while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET /favicon.ico HTTP/1.1", upstream: "http://io_nodes/favicon.ico", host: "nodebb.lan", referrer: "http://nodebb.lan/"
Aug 11 20:51:59 morecowbell.lan nginx[577]: 2024/08/11 20:51:59 [error] 577#577: *6 no live upstreams while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET / HTTP/1.1", upstream: "http://io_nodes/", host: "nodebb.lan"
Aug 11 20:51:59 morecowbell.lan nginx[577]: 2024/08/11 20:51:59 [error] 577#577: *6 no live upstreams while connecting to upstream, client: 192.168.1.10, server: nodebb.lan, request: "GET /favicon.ico HTTP/1.1", upstream: "http://io_nodes/favicon.ico", host: "nodebb.lan", referrer: "http://nodebb.lan/"

    Update: adding those ports to ufw did not fix it.

    0
  • phenomlabundefined

    @Madchatthew connection refused typically means that port is being used elsewhere.

    What’s the output of

    ./nodebb log

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab

    [nodebb@morecowbell public_html]$ ./nodebb log

Hit Ctrl-C to exit


tail: cannot open './logs/output.log' for reading: No such file or directory
    0
  • phenomlabundefined

    @Madchatthew hmm. That doesn’t look like it’s properly installed, or you have a permissions issue. What user are launching NodeBB as?

    Can you try

    ./nodebb dev

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab said in Mongodb or Redis:

    @Madchatthew hmm. That doesn’t look like it’s properly installed, or you have a permissions issue. What user are launching NodeBB as?

    Can you try

    ./nodebb dev

    I will give this a try this evening. At work now.

    1
  • phenomlabundefined

    @Madchatthew thanks. Let me know.

    Author of OGProxy, Swatch, Threaded, Card, and most of Sudonix's bugs…

    0
  • Madchatthewundefined

    @phenomlab here are those results. It is a little long but I wanted to make sure you were getting the whole picture.

    [nodebb@morecowbell public_html]$ ./nodebb dev

NodeBB v3.8.4 Copyright (C) 2013-2024 NodeBB Inc.
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under certain conditions.
For the full license, please visit: http://www.gnu.org/copyleft/gpl.html

Clustering enabled: Spinning up 3 process(es).

2024-08-13T01:03:42.527Z [4568/7624] - verbose: * using configuration stored in: /home/nodebb/public_html/config.json
2024-08-13T01:03:42.539Z [4567/7623] - verbose: * using configuration stored in: /home/nodebb/public_html/config.json
2024-08-13T01:03:42.547Z [4567/7623] - info: Initializing NodeBB v3.8.4 http://localhost:4567
2024-08-13T01:03:42.548Z [4567/7623] - verbose: * using mongo store at 127.0.0.1:27017
2024-08-13T01:03:42.548Z [4567/7623] - verbose: * using themes stored in: /home/nodebb/public_html/node_modules
2024-08-13T01:03:42.556Z [4569/7625] - verbose: * using configuration stored in: /home/nodebb/public_html/config.json
2024-08-13T01:03:42.961Z [4568/7624] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:42.966Z [4568/7624] - error: uncaughtException: NOAUTH Authentication required.
ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14) {"date":"Mon Aug 12 2024 20:03:42 GMT-0500 (Central Daylight Time)","error":{"command":{"args":[],"name":"info"}},"exception":true,"os":{"loadavg":[0.12,0.1,0.08],"uptime":84039.1},"process":{"argv":["/usr/bin/node","/home/nodebb/public_html/app.js"],"cwd":"/home/nodebb/public_html","execPath":"/usr/bin/node","gid":1006,"memoryUsage":{"arrayBuffers":18535346,"external":20792656,"heapTotal":55267328,"heapUsed":25627808,"rss":141299712},"pid":7624,"uid":1006,"version":"v22.6.0"},"stack":"ReplyError: NOAUTH Authentication required.\n    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)\n    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)","trace":[{"column":12,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseError","line":179,"method":null,"native":false},{"column":14,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseType","line":302,"method":null,"native":false}]}
2024-08-13T01:03:42.967Z [4568/7624] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:42.970Z [4567/7623] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:42.973Z [4569/7625] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:42.974Z [4567/7623] - error: uncaughtException: NOAUTH Authentication required.
ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14) {"date":"Mon Aug 12 2024 20:03:42 GMT-0500 (Central Daylight Time)","error":{"command":{"args":[],"name":"info"}},"exception":true,"os":{"loadavg":[0.12,0.1,0.08],"uptime":84039.11},"process":{"argv":["/usr/bin/node","/home/nodebb/public_html/app.js"],"cwd":"/home/nodebb/public_html","execPath":"/usr/bin/node","gid":1006,"memoryUsage":{"arrayBuffers":18535345,"external":20792655,"heapTotal":55267328,"heapUsed":25973952,"rss":142553088},"pid":7623,"uid":1006,"version":"v22.6.0"},"stack":"ReplyError: NOAUTH Authentication required.\n    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)\n    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)","trace":[{"column":12,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseError","line":179,"method":null,"native":false},{"column":14,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseType","line":302,"method":null,"native":false}]}
2024-08-13T01:03:42.975Z [4567/7623] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:42.978Z [4569/7625] - error: uncaughtException: NOAUTH Authentication required.
ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14) {"date":"Mon Aug 12 2024 20:03:42 GMT-0500 (Central Daylight Time)","error":{"command":{"args":[],"name":"info"}},"exception":true,"os":{"loadavg":[0.12,0.1,0.08],"uptime":84039.12},"process":{"argv":["/usr/bin/node","/home/nodebb/public_html/app.js"],"cwd":"/home/nodebb/public_html","execPath":"/usr/bin/node","gid":1006,"memoryUsage":{"arrayBuffers":18535345,"external":20792655,"heapTotal":55005184,"heapUsed":25626160,"rss":141709312},"pid":7625,"uid":1006,"version":"v22.6.0"},"stack":"ReplyError: NOAUTH Authentication required.\n    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)\n    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)","trace":[{"column":12,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseError","line":179,"method":null,"native":false},{"column":14,"file":"/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js","function":"parseType","line":302,"method":null,"native":false}]}
2024-08-13T01:03:42.980Z [4569/7625] - error: ReplyError: NOAUTH Authentication required.
    at parseError (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:179:12)
    at parseType (/home/nodebb/public_html/node_modules/redis-parser/lib/parser.js:302:14)
2024-08-13T01:03:44.687Z [4567/7623] - verbose: [minifier] utilizing a maximum of 2 additional threads
2024-08-13T01:03:44.707Z [4569/7625] - verbose: [minifier] utilizing a maximum of 2 additional threads
2024-08-13T01:03:44.712Z [4567/7623] - info: [app] Shutdown (SIGTERM/SIGINT/SIGQUIT) Initialised.
2024-08-13T01:03:44.720Z [4569/7625] - info: [app] Shutdown (SIGTERM/SIGINT/SIGQUIT) Initialised.
2024-08-13T01:03:44.767Z [4568/7624] - verbose: [minifier] utilizing a maximum of 2 additional threads
2024-08-13T01:03:44.780Z [4568/7624] - info: [app] Shutdown (SIGTERM/SIGINT/SIGQUIT) Initialised.
(node:7625) [DEP0040] DeprecationWarning: The `punycode` module is deprecated. Please use a userland alternative instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
2024-08-13T01:03:45.068Z [4569/7625] - error: Error [ERR_SERVER_NOT_RUNNING]: Server is not running.
    at Server.close (node:net:2278:12)
    at Object.onceWrapper (node:events:634:28)
    at Server.emit (node:events:520:28)
    at emitCloseNT (node:net:2338:8)
    at process.processTicksAndRejections (node:internal/process/task_queues:81:21)
(node:7623) [DEP0040] DeprecationWarning: The `punycode` module is deprecated. Please use a userland alternative instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
2024-08-13T01:03:45.073Z [4567/7623] - error: Error [ERR_SERVER_NOT_RUNNING]: Server is not running.
    at Server.close (node:net:2278:12)
    at Object.onceWrapper (node:events:634:28)
    at Server.emit (node:events:520:28)
    at emitCloseNT (node:net:2338:8)
    at process.processTicksAndRejections (node:internal/process/task_queues:81:21)
[cluster] Child Process (7625) has exited (code: 1, signal: null)
[cluster] Spinning up another process...
[cluster] Child Process (7623) has exited (code: 1, signal: null)
[cluster] Spinning up another process...
(node:7624) [DEP0040] DeprecationWarning: The `punycode` module is deprecated. Please use a userland alternative instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
2024-08-13T01:03:45.129Z [4568/7624] - error: Error [ERR_SERVER_NOT_RUNNING]: Server is not running.
    at Server.close (node:net:2278:12)
    at Object.onceWrapper (node:events:634:28)
    at Server.emit (node:events:520:28)
    at emitCloseNT (node:net:2338:8)
    at process.processTicksAndRejections (node:internal/process/task_queues:81:21)
[cluster] Child Process (7624) has exited (code: 1, signal: null)
[cluster] Spinning up another process...
    1
  • Madchatthewundefined

    Woot, I figured it out man!!! First off, in the config.json, i forgot to put the redis password on it. Then I was having trouble connecting to mongodb. I was googling, changing the config and finally did a sudo systemctl status mongodb to find out it wasn’t even running. So I enabled it, then started it and boom using ./nodebb dev started it right now.

    So then I went back in and configured my nodebb.service file to match what nodebb had on their site and BOOOM it is working. By using the scaling method, nodebb runs even faster and I don’t get the 503 error when refreshing.

    I have learned a lot by going through all of this and it is pretty awesome! Now having this complete, I have some more testing to do, but I am many steps closer to using Arch as my production server.

    🎆
    1

Related Topics
  • ahmedundefined

    Is my Mongodb installation correct?

    Solved General
    27
    13 Votes
    27 Posts
    2k Views
    ahmedundefined

    yuuuuu.png

  • ahmedundefined

    mongodb backup problem

    Moved Configure
    3
    1 Votes
    3 Posts
    216 Views
    phenomlabundefined

    You might want to also review this post

    https://sudonix.org/topic/389/mongodb-backup-script

  • veronikyaundefined

    mongodb replica set

    Configure
    11
    2 Votes
    11 Posts
    459 Views
    phenomlabundefined

    @veronikya said in mongodb replica set:

    The host’s local dns resolution is not configured. The problem of the host’s hosts being unable to be resolved in docker has been solved. Surprisingly
    Solution:
    Edit the /etc/resovel.conf file
    Add 127.0.0.53

    One immediate issue I can think of here is that editing resolv.conf directly is no longer supported and not recommended (because the changes do not survive a reboot) - unless you install the resolvconf package?

  • DownPWundefined

    MongoDB Tweaks : query to delete unverified-users and more 🙂

    Configure
    2
    3 Votes
    2 Posts
    177 Views
    phenomlabundefined

    @DownPW This isn’t something I have readily available, and because I’m not entirely familiar with the database structure of NodeBB, it’s something that would require research and development in terms of script.

    I think it’d be quicker to ask this in the NodeBB forums.

  • DownPWundefined

    Nodebb: failed to restore a mongo dump

    Solved Configure
    2
    1 Votes
    2 Posts
    193 Views
    DownPWundefined

    @phenomlab

    In fact I specified the sub rep and not the rep

    DON’T DO THIS:

    nodebb@nodebbpwclonedb:~/nodebb$ sudo mongorestore --username admin --password XXXXXXXXXXXXXX --nsInclude nodebb.objects --drop /home/nodebb/nodebb_DB_20230107/nodebb/

    BUT THIS :

    nodebb@nodebbpwclonedb:~/nodebb$ sudo mongorestore --username admin --password XXXXXXXXXXXXXX --nsInclude nodebb.objects --drop /home/nodebb/nodebb_DB_20230107/

    🙂

  • Sampo2910undefined

    Mongodb Authorisation.

    Solved General
    17
    2 Votes
    17 Posts
    661 Views
    phenomlabundefined

    @Sampo2910 I just saw this on the NodeBB community site and it seems very much in line with the issue you are experiencing. Worth a look I think

    https://community.nodebb.org/topic/16826/does-nodebb-work-with-mongodb-6-0

  • WesleyMouraundefined

    How to restrict external access to Redis instance installed in a docker image

    Solved Configure
    8
    4 Votes
    8 Posts
    1k Views
    WesleyMouraundefined

    @phenomlab
    Sorry to delay in responding, yes as i mentioned above, i had to remove my redis from docker and reinstall a new image with this command

    docker run --name=redis -p 127.0.0.1:6379:6379 -d -t redis:alpine

    and now when i test my ip and port on
    https://www.yougetsignal.com/tools/open-ports/

    the status of my redis port is closed. I think which to configure firewall in droplet digital ocean is a good idea too, and i will configure soon.
    Thanks for the help!

  • justoverclockundefined

    API database project? ideas?

    Chitchat
    1
    0 Votes
    1 Posts
    273 Views
    No one has replied