PC Imaging
-
The solution is to delete windows and throw away the software and install Linux haha - I keed I keed. I worked for a company years ago. It was a call center for Orbitz I think, where you can setup your own flights on their website. They also did a call center for American Airlines or Delta I can’t remember which one. I was in the IT department. It was me and another person that did everything. Whenever a pc would have issues and troubleshooting steps wouldn’t work to fix it, I would have to sit there and manually reinstall windows and all of the software and waste at least a couple of hours because the company wouldn’t let me use an imaging software. Which would have saved a lot of time per machine. It seemed like a regular occurrence that I would have to reinstall windows. Such a pain.
-
@Madchatthew said in 24H2 Official ISO Don't support custom wim file:
I would have to sit there and manually reinstall windows and all of the software and waste at least a couple of hours because the company wouldn’t let me use an imaging software. Which would have saved a lot of time per machine. It seemed like a regular occurrence that I would have to reinstall windows. Such a pain.
I recall those days (with dread). I also come from the old days of GHOST in relation to the imaging of PC’s
-
@phenomlab said in 24H2 Official ISO Don't support custom wim file:
I recall those days (with dread). I also come from the old days of GHOST in relation to the imaging of PC’s
Yyeeessss! That is what we used was ghost and then I think there was another one that I used later on, but I remember ghost being the main one. Aaahhh those were the days!
-
@Madchatthew Yeah, I recall having to do this with a floppy disk - the real issue is that the Compaq DeskPro machines we were using at the time were floppyless, so I had to use a COM port based floppy drive - talk about S L O W…
-
@phenomlab Oh wow, that is torture just even thinking about that. I hated Compaq DeskPro machines. And HP. And Dell. And Especially Packard Bell. Bleh
-
@Madchatthew In the 90’s, that was the best available. Packard Bell? Hated those 486SX units…
-
@phenomlab Yes, I hated those too. When I was doing computer repair back in the day, it was always HP, Packard Bell and Dell that I would always be working on nonstop. The computers the two places I worked that also sold PCs, tended to be better but they still used cheaper parts. I have grown to use only Asus parts for motherboard, graphics card (whether nvidia or radeon), corsair for memory and power supplies, and I am open to brand on SSDs, but usually lean towards Samsung, Corsair or Western Digital. These parts cost more but I have had my computer now for 10 years, and the three or four computers I built for the church school my mom works at are 8+ years old now and they just keep ticking. But because of windows 11 requirements, they will either need to switch to Linux or buy new computers.
-
@Madchatthew I forked this discussion so @DownPW post didn’t go off-topic.
Yes, there’s definitely an element of “you get what you pay for” when it comes to PC parts. I must admit, I’ve not built a PC in years (never really had the need to be honest), but the last one I did build for myself had a Chaintech motherboard - frankly awful in fact.
You can’t go wrong with ASUS parts. I’m particularly keen on Crucial for memory - see below
Windows 11 does have some pretty hefty requirements - mostly around the TPM and the type of Processor, and whilst it’s possible to still install using a number of hacks, is it actually worth it going forward? How long before Micro$oft block those bypass routes?
You’re better off with Linux in the church in my view.
-
-
@phenomlab Yeah they are a good company and their parts are so worth it. I did build one PC where I used an MSI motherboard and I regretted it soon after. I believe I ended up switching it out for an Asus motherboard.
@phenomlab said in PC Imaging:
You’re better off with Linux in the church in my view.
100% agree!
-
@Madchatthew Reminds me of the issues experienced with BX440 motherboards. Now there’s a blast from the past.
-
@phenomlab Oh wow, I remember dealing with those boards. I believe I wanted to take them out of the case and break them over my knee and/or whip them across the room and such. LOL. Well that was a little violent hahaha
-
I remember one time, one of the guys I was working with was working on a PC. He has done some things with it and when he plugged it in and turned it on, there was an actual flame jet shooting out of one of the chips. I never saw anyone unplug a PC faster than that LOL. Of course the customer ended up just buying a new PC at that point. They had the option of getting a new motherboard but chose not to.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (ether email, or push notification). You'll also be able to save bookmarks, use reactions, and upvote to show your appreciation to other community members.
With your input, this post could be even better 💗
RegisterLog in
1/12