Skip to content

NodeBB: Favicon upload issue

Solved Configure
12 3 1.9k 1
  • Hi,
    I am trying to load a 512x512px favicon to my NodeBB forum, but it doesn’t go past the below status:
    Screen Shot 2023-04-04 at 8.54.21 pm.png
    The above is a PNG file.

    Then, I attempted an upload with a 48x48 .ICO file and that loaded successfully. But it isn’t loading the image on the site though.

    I’ve been reading a thread on NodeBB forum where someone had a similar issue.

    How can I fix this issue? I had this issue in both V2 and now in the V3 versions. I have attempted reload and refresh a few times, but it isn’t helping.

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

    @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

  • Hi,
    I am trying to load a 512x512px favicon to my NodeBB forum, but it doesn’t go past the below status:
    Screen Shot 2023-04-04 at 8.54.21 pm.png
    The above is a PNG file.

    Then, I attempted an upload with a 48x48 .ICO file and that loaded successfully. But it isn’t loading the image on the site though.

    I’ve been reading a thread on NodeBB forum where someone had a similar issue.

    How can I fix this issue? I had this issue in both V2 and now in the V3 versions. I have attempted reload and refresh a few times, but it isn’t helping.

    @mventures This issue is a common one, and likely because nginx is caching the values it already has. The fastest wat to fix this would be to

    1. Gain access via SSH to your server
    2. Login
    3. Issue command sudo service nginx restart and press enter

    This will cause nginx to restart, and should also empty the cache. Then see if this resolves the issue.

  • @mventures This issue is a common one, and likely because nginx is caching the values it already has. The fastest wat to fix this would be to

    1. Gain access via SSH to your server
    2. Login
    3. Issue command sudo service nginx restart and press enter

    This will cause nginx to restart, and should also empty the cache. Then see if this resolves the issue.

    @phenomlab Would this route work as it seems simpler: Go to ACP > Advanced > Cache?

  • @phenomlab Would this route work as it seems simpler: Go to ACP > Advanced > Cache?

    @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

  • @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

    This post is deleted!
  • @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

    @phenomlab Oh my! Sounds scary again. I read this old post about SSH, and I am not so sure if I want to take any risks 😞

    https://sudonix.com/topic/391/secure-ssh-connectivty?_=1680516532796

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

    @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

  • phenomlabundefined phenomlab has marked this topic as solved on
  • @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

    Hey @phenomlab, Thanks for looking into this! Did you make the change?
    Because I can still see the BB logo as the favicon on the desktop (safari, chrome) and the mobile.
    But on an iPad, I can see my favicon.

  • Hey @phenomlab, Thanks for looking into this! Did you make the change?
    Because I can still see the BB logo as the favicon on the desktop (safari, chrome) and the mobile.
    But on an iPad, I can see my favicon.

    @mventures

    I have the same problem. I never managed to solve it.

    There is always a moment when I see that of NodeBB when I have nowhere on the server (nginx cache dump, cloudflare, nodebb, etc…)

  • @mventures

    I have the same problem. I never managed to solve it.

    There is always a moment when I see that of NodeBB when I have nowhere on the server (nginx cache dump, cloudflare, nodebb, etc…)

    @DownPW Yes, it can be sporadic, but in the case of @mventures it should be resolved.

    For example, viewing the site in incognito mode

    ce68b924-52ac-4eef-936e-c452037dde20-image.png

    And also checking with several favicon testers

    130425c8-97a2-4c6b-8127-6f5940e42afe-image.png

    @mventures can you try with a browser you’ve never used before, or perhaps an incognito tab? If that doesn’t work, also try the below

    1. Open Google Chrome
    2. Navigate to the website
    3. Open the developer tools (press F12)
    4. Click and hold the browser reload button so that the advanced options appear

    7c8a2857-78b8-4b41-931f-141bd8da8acb-image.png

    1. Select the option to “Empty cache and hard reload”
  • @DownPW Yes, it can be sporadic, but in the case of @mventures it should be resolved.

    For example, viewing the site in incognito mode

    ce68b924-52ac-4eef-936e-c452037dde20-image.png

    And also checking with several favicon testers

    130425c8-97a2-4c6b-8127-6f5940e42afe-image.png

    @mventures can you try with a browser you’ve never used before, or perhaps an incognito tab? If that doesn’t work, also try the below

    1. Open Google Chrome
    2. Navigate to the website
    3. Open the developer tools (press F12)
    4. Click and hold the browser reload button so that the advanced options appear

    7c8a2857-78b8-4b41-931f-141bd8da8acb-image.png

    1. Select the option to “Empty cache and hard reload”

    @phenomlab I am on a Mac, so I used the “Option + Command + I”, and then performed the steps. It loaded my favicon! I checked on Firefox which I haven’t used before, and it showed my favicon also! That’s fantastic and thank you for the help!


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Difficult to move posts now, on mobile.

    Bugs nodebb
    16
    1
    5 Votes
    16 Posts
    3k Views
    @DownPW Yes, it is. It’s set far too low meaning other elements with a higher preference will sit over the top of it.
  • Composer options on nodebb

    Solved Configure nodebb
    8
    1
    3 Votes
    8 Posts
    1k Views
    @Panda You should be able to expose the CSS for these using F12 to get into console [image: 1686833368846-3591518c-e3a3-4ada-a43c-6b32a5e0359c-image.png] [image: 1686833399483-a2b8ed46-4157-4ff2-85f0-576543380107-image.png] That should then expose the element once selected [image: 1686833431032-89d9c545-a47a-40d1-98f4-80cf3b958e8f-image.png] Here’s the below CSS you need based on the screenshot provided. .composer .formatting-bar .formatting-group li[data-format="picture-o"], .composer .formatting-bar .formatting-group li[data-format="spoiler"] { display: none; }
  • NodeBB upgrade now cant post

    Solved Bugs nodebb
    5
    2 Votes
    5 Posts
    1k Views
    @Panda yes, for some reason, that is the case. If you need an urgent response, it’s probably better to post here because of the time difference.
  • NodeBB: Consent page

    Solved Configure nodebb consent
    16
    4 Votes
    16 Posts
    4k Views
    @DownPW I still do not see any issues.
  • Top Ranked Forums

    Chitchat nodebb top ranked
    9
    1
    3 Votes
    9 Posts
    2k Views
    The real issue here is that most people consider forums to be “dead” in the sense that nobody uses them anymore, and social media groups have taken their place. Their once dominant stance in the 90’s and early 00’s will never be experienced again, but having said that, there are a number of forums that did in fact survive the social media onslaught, and still enjoy a large user base. Forums tend to be niche. One that immediately sticks out is Reddit - despite looking like it was designed in the 80s, it still has an enormous user base. Another is Stack Overflow, which needs no introduction. The key to any forum is the content it offers, and the more people whom contribute in terms of posting , the more popular and widely respected it becomes as a reliable source of information. Forums are still intensely popular with gamers, alongside those that offer tips on hacking etc.
  • Title on homepage of nodebb forum

    Solved Customisation nodebb
    2
    1 Votes
    2 Posts
    1k Views
    @eveh Welcome board The code you are referring to is custom written as no such functionality exists under NodeBB. However, adding the functionality is relatively trivial. Below are the required steps Navigate to /admin/appearance/customise#custom-header Add the below code to your header, and save once completed <ol id="mainbanner" class="breadcrumb"><li id="addtext">Your Title Goes Here</li></ol> Navigate to /admin/appearance/customise#custom-js and add the below code, then save $(document).ready(function() { $(window).on('action:ajaxify.end', function(data) { // Initialise mainbanner ID, but hide it from view $('#mainbanner').hide(); var pathname = window.location.pathname; if (pathname === "/") { $("#addtext").text("Your Title"); $('#mainbanner').show(); } else {} // If we want to add a title to a sub page, uncomment the below and adjust accordingly //if (pathname === "/yourpath") { //$("#addtext").text("Your Title"); //$('#mainbanner').show(); //} }); }); Navigate to /admin/appearance/customise#custom-css and add the below CSS block .breadcrumb { right: 0; margin-right: auto; text-align: center; background: #0086c4; color: #ffffff; width: 100vw; position: relative; margin-left: -50vw; left: 50%; top: 50px; position: fixed; z-index: 1020; } Note, that you will need to adjust your CSS code to suit your own site / requirements.
  • Configure SMTP for Nodebb

    Solved Configure
    14
    5 Votes
    14 Posts
    2k Views
    @marusaky based on the work completed thus far (in relation to PM exchanges), I’m going to mark this completed. Sending email from the server itself works fine without issue, and DNS appears to be clean (valid SPF, DMARC, and DKIM records). It appears that only Gmail marks incoming messages from your domain as spam - perhaps because of the domain age, which there is nothing we can do to prevent this. Mail delivery to all other domains appears to work fine in al of my tests.
  • Dark Theme Upper Padding

    Solved Customisation nodebb
    7
    1
    6 Votes
    7 Posts
    1k Views
    @DownPW great! thanks a lot… this code solves my problem.