Skip to content

NodeBB: Favicon upload issue

Solved Configure
12 3 2.2k 1
  • Hi,
    I am trying to load a 512x512px favicon to my NodeBB forum, but it doesn’t go past the below status:
    Screen Shot 2023-04-04 at 8.54.21 pm.png
    The above is a PNG file.

    Then, I attempted an upload with a 48x48 .ICO file and that loaded successfully. But it isn’t loading the image on the site though.

    I’ve been reading a thread on NodeBB forum where someone had a similar issue.

    How can I fix this issue? I had this issue in both V2 and now in the V3 versions. I have attempted reload and refresh a few times, but it isn’t helping.

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

    @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

  • Hi,
    I am trying to load a 512x512px favicon to my NodeBB forum, but it doesn’t go past the below status:
    Screen Shot 2023-04-04 at 8.54.21 pm.png
    The above is a PNG file.

    Then, I attempted an upload with a 48x48 .ICO file and that loaded successfully. But it isn’t loading the image on the site though.

    I’ve been reading a thread on NodeBB forum where someone had a similar issue.

    How can I fix this issue? I had this issue in both V2 and now in the V3 versions. I have attempted reload and refresh a few times, but it isn’t helping.

    @mventures This issue is a common one, and likely because nginx is caching the values it already has. The fastest wat to fix this would be to

    1. Gain access via SSH to your server
    2. Login
    3. Issue command sudo service nginx restart and press enter

    This will cause nginx to restart, and should also empty the cache. Then see if this resolves the issue.

  • @mventures This issue is a common one, and likely because nginx is caching the values it already has. The fastest wat to fix this would be to

    1. Gain access via SSH to your server
    2. Login
    3. Issue command sudo service nginx restart and press enter

    This will cause nginx to restart, and should also empty the cache. Then see if this resolves the issue.

    @phenomlab Would this route work as it seems simpler: Go to ACP > Advanced > Cache?

  • @phenomlab Would this route work as it seems simpler: Go to ACP > Advanced > Cache?

    @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

  • @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

    This post is deleted!
  • @mventures No. The nginx server it the web server itself. The ACP is the NodeBB application - they are completely seperated.

    @phenomlab Oh my! Sounds scary again. I read this old post about SSH, and I am not so sure if I want to take any risks 😞

    https://sudonix.com/topic/391/secure-ssh-connectivty?_=1680516532796

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

  • I am back - I read the SSH documentation and looks like a “no, can’t do” for me, unless I get handheld training followed by a bit of practice, I don’t think I can do it. Unfortunately/fortunately, I will need to trouble you again for this cache clearance. (FYI - I have a list of coffees owed, and this one is in it)

    @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

  • phenomlabundefined phenomlab has marked this topic as solved on
  • @mventures Having taken a look at this, the favicon.ico file is required in two places to work - one is in /public/uploads/system and the other is in public at the root level - see below

    f6be09e5-2afa-41cf-9480-de2bf7fb6fdc-image.png

    I’ve tested this against a favicon checker, and it now works - I used the one you uploaded for the touchicon to generate it.

    Hey @phenomlab, Thanks for looking into this! Did you make the change?
    Because I can still see the BB logo as the favicon on the desktop (safari, chrome) and the mobile.
    But on an iPad, I can see my favicon.

  • Hey @phenomlab, Thanks for looking into this! Did you make the change?
    Because I can still see the BB logo as the favicon on the desktop (safari, chrome) and the mobile.
    But on an iPad, I can see my favicon.

    @mventures

    I have the same problem. I never managed to solve it.

    There is always a moment when I see that of NodeBB when I have nowhere on the server (nginx cache dump, cloudflare, nodebb, etc…)

  • @mventures

    I have the same problem. I never managed to solve it.

    There is always a moment when I see that of NodeBB when I have nowhere on the server (nginx cache dump, cloudflare, nodebb, etc…)

    @DownPW Yes, it can be sporadic, but in the case of @mventures it should be resolved.

    For example, viewing the site in incognito mode

    ce68b924-52ac-4eef-936e-c452037dde20-image.png

    And also checking with several favicon testers

    130425c8-97a2-4c6b-8127-6f5940e42afe-image.png

    @mventures can you try with a browser you’ve never used before, or perhaps an incognito tab? If that doesn’t work, also try the below

    1. Open Google Chrome
    2. Navigate to the website
    3. Open the developer tools (press F12)
    4. Click and hold the browser reload button so that the advanced options appear

    7c8a2857-78b8-4b41-931f-141bd8da8acb-image.png

    1. Select the option to “Empty cache and hard reload”
  • @DownPW Yes, it can be sporadic, but in the case of @mventures it should be resolved.

    For example, viewing the site in incognito mode

    ce68b924-52ac-4eef-936e-c452037dde20-image.png

    And also checking with several favicon testers

    130425c8-97a2-4c6b-8127-6f5940e42afe-image.png

    @mventures can you try with a browser you’ve never used before, or perhaps an incognito tab? If that doesn’t work, also try the below

    1. Open Google Chrome
    2. Navigate to the website
    3. Open the developer tools (press F12)
    4. Click and hold the browser reload button so that the advanced options appear

    7c8a2857-78b8-4b41-931f-141bd8da8acb-image.png

    1. Select the option to “Empty cache and hard reload”

    @phenomlab I am on a Mac, so I used the “Option + Command + I”, and then performed the steps. It loaded my favicon! I checked on Firefox which I haven’t used before, and it showed my favicon also! That’s fantastic and thank you for the help!


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • What’s going on with NodeBB?

    Performance nodebb script die
    20
    5 Votes
    20 Posts
    1k Views
    @cagatay The most reliable way to upgrade Node.js on Ubuntu depends on how you originally installed it. Method 1: Using NVM (Recommended) If you already use Node Version Manager (NVM), upgrading is simple. NVM allows you to keep both versions and switch between them if needed. Install Node 22: nvm install 22 Switch to Node 22: nvm use 22 Set it as your default: nvm alias default 22 Verify the change: node -v Method 2: Using NodeSource (PPA) If you installed Node.js via apt using the NodeSource repository, you need to update the repository script to point to the new version. Remove the old NodeSource list (optional but cleaner): sudo rm /etc/apt/sources.list.d/nodesource.list Download and run the NodeSource setup script for Node 22: curl -fsSL [https://deb.nodesource.com/setup_22.x](https://deb.nodesource.com/setup_22.x) | sudo -E bash - Install/Upgrade Node.js: sudo apt-get install -y nodejs Verify the installation: node -v Method 3: Using the ‘n’ Package If you have npm installed, you can use the n interactive manager. Clear the npm cache: sudo npm cache clean -f Install the ‘n’ helper: sudo npm install -g n Install Node 22: sudo n 22 Update your shell: hash -r Troubleshooting Permission Denied: If you see permission errors using Method 2 or 3, ensure you are using sudo. Path Issues: If node -v still shows version 20 after upgrading via NVM, restart your terminal or run source ~/.bashrc. Conflicts: Avoid mixing these methods. If you switch from apt to nvm, it is best to sudo apt remove nodejs first to avoid path conflicts.
  • 3 Votes
    1 Posts
    635 Views
    No one has replied
  • nodebb error logs

    Bugs nodebb
    6
    2
    4 Votes
    6 Posts
    1k Views
    I just wanted to ask because I don’t have much knowledge about the new installation. Thank you for the explanatory answer.
  • Fixed background to nodebb forum

    Solved Configure nodebb
    25
    4 Votes
    25 Posts
    6k Views
    @Panda said in Fixed background to nodebb forum: Chatgpt told me the ::before method. Go figure
  • Composer options on nodebb

    Solved Configure nodebb
    8
    1
    3 Votes
    8 Posts
    1k Views
    @Panda You should be able to expose the CSS for these using F12 to get into console [image: 1686833368846-3591518c-e3a3-4ada-a43c-6b32a5e0359c-image.png] [image: 1686833399483-a2b8ed46-4157-4ff2-85f0-576543380107-image.png] That should then expose the element once selected [image: 1686833431032-89d9c545-a47a-40d1-98f4-80cf3b958e8f-image.png] Here’s the below CSS you need based on the screenshot provided. .composer .formatting-bar .formatting-group li[data-format="picture-o"], .composer .formatting-bar .formatting-group li[data-format="spoiler"] { display: none; }
  • restarting nodebb on boot

    Unsolved Configure nodebb
    3
    1 Votes
    3 Posts
    1k Views
    @eeeee said in restarting nodebb on boot: can I just run nodebb under nodemon for auto restarts? It’s a better method. Nodemon just looks for file system changes and would effectively die if the server was rebooted meaning you’d have to start it again anyway. Systemd is the defacto standard which is how the operating system interacts in terms of services, scheduled tasks etc.
  • nodebb dropdown menu

    Solved Configure nodebb
    5
    1
    0 Votes
    5 Posts
    1k Views
    @phenomlab said in nodebb dropdown menu: @kurulumu-net You set it like the below example taken from this site [image: 1637939951821-aae36790-3257-4bb2-ad5a-0d744309876a-image.png] Which presents this [image: 1637939983445-77f47260-2941-4afe-9614-8e17dcfc8c19-image.png] Very interesting… I actually thought this wasn’t possible, as I remember it being asked in the NodeBB forum. Is this something new that’s been implemented? I’ll 100% be doing that when I’m on the laptop over the weekend.
  • Iframely (Nodebb)

    Solved Configure
    40
    4 Votes
    40 Posts
    9k Views
    @DownPW This is now resolved. The issue was an incorrect URL specified in the Nodebb plugin. I’ve corrected this, and now it works as intended.