Skip to content
Sudonix

Fontawesome 5

Unsolved Customisation
14 2 4.5k 1
  • pwsincdundefined

    What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

    0
  • pwsincdundefined pwsincd

    What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

    phenomlabundefined

    @pwsincd are you looking to use the pro version or free ?

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • phenomlabundefined phenomlab

    @pwsincd are you looking to use the pro version or free ?

    pwsincdundefined

    @phenomlab the free version

    0
  • pwsincdundefined pwsincd

    @phenomlab the free version

    phenomlabundefined

    @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
font-family: "Font Awesome 5 Free";
font-weight: 900;
}

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • phenomlabundefined phenomlab

    @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
font-family: "Font Awesome 5 Free";
font-weight: 900;
}

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

    pwsincdundefined

    @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

    0
  • pwsincdundefined pwsincd

    @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

    phenomlabundefined

    @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • phenomlabundefined phenomlab

    @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

    pwsincdundefined

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    phenomlabundefined 2 Replies
    0
  • pwsincdundefined pwsincd

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    phenomlabundefined

    @pwsincd Can you share a URL where I can see this ? Over PM if you’d prefer 🙂

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • pwsincdundefined pwsincd

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    phenomlabundefined

    @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • phenomlabundefined phenomlab

    @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

    pwsincdundefined

    @phenomlab did u make an account

    0
  • pwsincdundefined pwsincd

    @phenomlab did u make an account

    phenomlabundefined

    @pwsincd Just created one

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • phenomlabundefined phenomlab

    @pwsincd Just created one

    pwsincdundefined

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    phenomlabundefined 2 Replies
    1
  • pwsincdundefined pwsincd

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    phenomlabundefined

    @pwsincd no problems. Just let me know.

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
  • pwsincdundefined pwsincd

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    phenomlabundefined

    @pwsincd hi. Just following up on this thread (I know it’s old) but was curious to understand if it’s still an issue or not ?

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd

    0
Log in to reply

Related Topics
  • Pandaundefined

    Spam spam spam

    Solved Configure nodebb
    6
    2 Votes
    6 Posts
    2k Views
    phenomlabundefined
    @Panda said in Spam spam spam: ok, yes Ive seen the queue, it shows IP, but doesnt have a field for comments from registrant. It’s not designed for that. It merely serves as a gateway between posts appearing on your form or not. @Panda said in Spam spam spam: It would be better if nodebb had this plugin included in ACP list, as not only then do you know its approved and should work, but many people cant or dont want to use CLI on the server That’s a question for the NodeBB devs but in all honesty you can’t not use the CLI when installing nodebb so to be this isn’t a big deal.
  • phenomlabundefined

    Switch between list and card view function

    Moved Let's Build It cards layout css
    107
    1
    50 Votes
    107 Posts
    47k Views
    phenomlabundefined
    @crazycells [image: 1711908210287-7f4c7193-7c28-4e2e-80e8-d439ac7285c6-image.png] [image: 1711908232109-3ab9c33d-04b9-4c15-91e6-891450aebfc2-image.png]
  • Pandaundefined

    Bug in Nodebb route when clicking title

    Moved Configure nodebb
    3
    2 Votes
    3 Posts
    1k Views
    Pandaundefined
    Ah silly me, thanks for finding that!
  • Pandaundefined

    Nodebb design

    Solved General nodebb
    2
    1 Votes
    2 Posts
    1k Views
    phenomlabundefined
    @Panda said in Nodebb design: One negative is not being so good for SEO as more Server side rendered forums, if web crawlers dont run the JS to read the forum. From recollection, Google and Bing have the capability to read and process JS, although it’s not in the same manner as a physical person will consume content on a page. It will be seen as plain text, but will be indexed. However, it’s important to note that Yandex and Baidu will not render JS, although seeing as Google has a 90% share of the content available on the web in terms of indexing, this isn’t something you’ll likely lose sleep over. @Panda said in Nodebb design: The “write api” is preferred for server-to-server interactions. This is mostly based around overall security - you won’t typically want a client machine changing database elements or altering data. This is why you have “client-side” which could be DOM manipulation etc, and “server-side” which performs more complex operations as it can communicate directly with the database whereas the client cannot (and if it can, then you have a serious security flaw). Reading from the API is perfectly acceptable on the client-side, but not being able to write. A paradigm here would be something like SNMP. This protocol exists as a UDP (UDP is very efficient, as it is “fire and forget” and does not wait for a response like TCP does) based service which reads performance data from a remote source, thus enabling an application to parse that data for use in a monitoring application. In all cases, SNMP access should be “RO” (Read Only) and not RW (Read Write). It is completely feasible to assume complete control over a firewall for example by having RW access to SNMP and then exposing it to the entire internet with a weak passphrase. You wouldn’t do it (at least, I hope you wouldn’t) and the same ethic applies to server-side rendering and the execution of commands.
  • Pandaundefined

    restarting nodebb on boot

    Unsolved Configure nodebb
    3
    1 Votes
    3 Posts
    2k Views
    phenomlabundefined
    @eeeee said in restarting nodebb on boot: can I just run nodebb under nodemon for auto restarts? It’s a better method. Nodemon just looks for file system changes and would effectively die if the server was rebooted meaning you’d have to start it again anyway. Systemd is the defacto standard which is how the operating system interacts in terms of services, scheduled tasks etc.
  • cagatayundefined

    Changing Background on NodeBB

    Solved Customisation background image nodebb
    4
    0 Votes
    4 Posts
    2k Views
    phenomlabundefined
    @cagatay You’d target the body tag and use the below line of CSS background: url(/assets/customcss/backgrounds/default/default.png) no-repeat center center fixed; Obviously, you need to change the path to suit where your image is being stored. More info around the background property can be found here https://www.w3schools.com/cssref/css3_pr_background.php
  • DownPWundefined

    [NODEBB] Welcome Message

    Solved Customisation css html nodebb
    20
    2
    13 Votes
    20 Posts
    8k Views
    phenomlabundefined
    @DownPW the ‘js’ code for the banner takes the time from the client, so what it displays really depends on the regional settings for the operating system. I’ve not seen this issue myself but would like to see some examples of screenshots if possible.
  • RiekMediaundefined

    NodeBB Design help

    Solved Customisation
    8
    3
    2 Votes
    8 Posts
    3k Views
    phenomlabundefined
    @riekmedia I’ve applied some new CSS to your site. Can you reload the page and try again ? For the record, this is what I added #footer { background: #2d343e; border-top: 4px solid #2d343e; font-size: 0.9em; margin-top: 70px; padding: 80px 0 0; position: relative; clear: both; bottom: 0; left: 0; right: 0; z-index: 1000; margin-left: -15px; margin-right: -338px; } The /categories page seems a bit messed up, so looking at that currently EDIT - issued some override CSS in the CATEGORIES widget <!--- CSS fix for overspill on /categories page - DO NOT DELETE --> <style> #footer { margin-right: -45px; } </style> That should resolve the /categories issue.