Skip to content

Fontawesome 5

Unsolved Customisation
14 2 5.2k 1
  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

    @pwsincd are you looking to use the pro version or free ?

  • @pwsincd are you looking to use the pro version or free ?

    @phenomlab the free version

  • @phenomlab the free version

    @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

  • @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

    @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

  • @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

    @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

  • @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd Can you share a URL where I can see this ? Over PM if you’d prefer 🙂

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

  • @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

    @phenomlab did u make an account

  • @phenomlab did u make an account

    @pwsincd Just created one

  • @pwsincd Just created one

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd no problems. Just let me know.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd hi. Just following up on this thread (I know it’s old) but was curious to understand if it’s still an issue or not ?


Related Topics
  • 15 Votes
    51 Posts
    25k Views
    Oh yes, that’s what’s super cool, I learn something every day. Afterwards I start from so low in JS
  • NodeBB socket with CloudFlare

    Solved Performance socket cloudflare nodebb
    24
    3 Votes
    24 Posts
    14k Views
    Solved. Tuto here and here
  • Nodebb design

    Solved General nodebb
    2
    1 Votes
    2 Posts
    1k Views
    @Panda said in Nodebb design: One negative is not being so good for SEO as more Server side rendered forums, if web crawlers dont run the JS to read the forum. From recollection, Google and Bing have the capability to read and process JS, although it’s not in the same manner as a physical person will consume content on a page. It will be seen as plain text, but will be indexed. However, it’s important to note that Yandex and Baidu will not render JS, although seeing as Google has a 90% share of the content available on the web in terms of indexing, this isn’t something you’ll likely lose sleep over. @Panda said in Nodebb design: The “write api” is preferred for server-to-server interactions. This is mostly based around overall security - you won’t typically want a client machine changing database elements or altering data. This is why you have “client-side” which could be DOM manipulation etc, and “server-side” which performs more complex operations as it can communicate directly with the database whereas the client cannot (and if it can, then you have a serious security flaw). Reading from the API is perfectly acceptable on the client-side, but not being able to write. A paradigm here would be something like SNMP. This protocol exists as a UDP (UDP is very efficient, as it is “fire and forget” and does not wait for a response like TCP does) based service which reads performance data from a remote source, thus enabling an application to parse that data for use in a monitoring application. In all cases, SNMP access should be “RO” (Read Only) and not RW (Read Write). It is completely feasible to assume complete control over a firewall for example by having RW access to SNMP and then exposing it to the entire internet with a weak passphrase. You wouldn’t do it (at least, I hope you wouldn’t) and the same ethic applies to server-side rendering and the execution of commands.
  • Where are widgets stored?

    Solved Configure nodebb
    3
    1 Votes
    3 Posts
    1k Views
    @phenomlab Thanks, have DMed you
  • NodeBB upgrade now cant post

    Solved Bugs nodebb
    5
    2 Votes
    5 Posts
    2k Views
    @Panda yes, for some reason, that is the case. If you need an urgent response, it’s probably better to post here because of the time difference.
  • Want to use Sudonix themes ?

    Chitchat themes nodebb
    80
    1
    34 Votes
    80 Posts
    29k Views
    omg thank you Mark.
  • NodeBB: Privileges for the Announcement channel

    Solved Configure nodebb
    6
    1
    1 Votes
    6 Posts
    2k Views
    Up to you really
  • [NodeBB] First post customization

    Solved Customisation nodebb
    5
    4 Votes
    5 Posts
    2k Views
    @phenomlab thanks