Skip to content

Fontawesome 5

Unsolved Customisation
14 2 5.2k 1
  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

    @pwsincd are you looking to use the pro version or free ?

  • @pwsincd are you looking to use the pro version or free ?

    @phenomlab the free version

  • @phenomlab the free version

    @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

  • @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

    @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

  • @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

    @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

  • @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd Can you share a URL where I can see this ? Over PM if you’d prefer 🙂

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

  • @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

    @phenomlab did u make an account

  • @phenomlab did u make an account

    @pwsincd Just created one

  • @pwsincd Just created one

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd no problems. Just let me know.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd hi. Just following up on this thread (I know it’s old) but was curious to understand if it’s still an issue or not ?


Related Topics
  • Planned sunset of NTFY plugin

    Pinned Announcements push nodebb ntfy
    7
    1
    8 Votes
    7 Posts
    4k Views
    I’ve noticed that I’m the only one subscribed to the push notifications on this site. If you were using NTFY previously, and have noticed that you’ve not had any alerts for a while, it’s because this feature has been disabled. You’ll now need to use the push notification to replace NTFY as mentioned in the first post.
  • NodeBB inline videoplayer

    Solved Customisation nodebb
    12
    3 Votes
    12 Posts
    4k Views
    @phenomlab YAY! It works Thanks so much
  • Adding fileWrite to nodebb code

    Solved Configure nodebb
    16
    1
    5 Votes
    16 Posts
    5k Views
    @eveh this might be a question for the NodeBB Devs themselves. In all honesty, I’m not entirely sure without having to research this myself.
  • Title on homepage of nodebb forum

    Solved Customisation nodebb
    2
    1 Votes
    2 Posts
    2k Views
    @eveh Welcome board The code you are referring to is custom written as no such functionality exists under NodeBB. However, adding the functionality is relatively trivial. Below are the required steps Navigate to /admin/appearance/customise#custom-header Add the below code to your header, and save once completed <ol id="mainbanner" class="breadcrumb"><li id="addtext">Your Title Goes Here</li></ol> Navigate to /admin/appearance/customise#custom-js and add the below code, then save $(document).ready(function() { $(window).on('action:ajaxify.end', function(data) { // Initialise mainbanner ID, but hide it from view $('#mainbanner').hide(); var pathname = window.location.pathname; if (pathname === "/") { $("#addtext").text("Your Title"); $('#mainbanner').show(); } else {} // If we want to add a title to a sub page, uncomment the below and adjust accordingly //if (pathname === "/yourpath") { //$("#addtext").text("Your Title"); //$('#mainbanner').show(); //} }); }); Navigate to /admin/appearance/customise#custom-css and add the below CSS block .breadcrumb { right: 0; margin-right: auto; text-align: center; background: #0086c4; color: #ffffff; width: 100vw; position: relative; margin-left: -50vw; left: 50%; top: 50px; position: fixed; z-index: 1020; } Note, that you will need to adjust your CSS code to suit your own site / requirements.
  • Bootstrap Version

    Solved Customisation nodebb bootstrap
    8
    5 Votes
    8 Posts
    2k Views
    @phenomlab That will be nice once they have completed that. It will be interesting to see how long that takes. So for now I will use custom css to make it look the way I want. Frameworks just make things a little faster. Thanks @phenomlab
  • NodeBB metadata

    Solved Configure nodebb
    4
    2 Votes
    4 Posts
    2k Views
    @phenomlab said in NodeBB metadata: @jac Are you sure ? https://www.google.co.uk/search?q=site%3Astockportcounty.fans&sxsrf=AOaemvLwnaZL-PliU_2dBOg_Eo1pMVhBjg%3A1638982328139&source=hp&ei=uOKwYeatBcOsad3yp7AE&iflsig=ALs-wAMAAAAAYbDwyLBSDcG5XYoFCKwQFhgz94wTxOcV&ved=0ahUKEwjm6dX71NT0AhVDVhoKHV35CUYQ4dUDCAk&uact=5&oq=site%3Astockportcounty.fans&gs_lcp=Cgdnd3Mtd2l6EAM6BAgjECc6CwgAEIAEELEDEIMBOg4ILhCABBCxAxDHARCjAjoRCC4QgAQQsQMQgwEQxwEQowI6BQguEIAEOggIABCABBCxAzoFCAAQgAQ6CAguELEDEIMBOgsILhCABBDHARCvAToICC4QgAQQsQM6BQgAELEDOgsILhCABBDHARDRAzoLCAAQgAQQsQMQyQM6BQgAEJIDUABYySZg0CdoAHAAeACAAW2IAa0NkgEEMjMuMpgBAKABAQ&sclient=gws-wiz Fair enough 🤪🤪.
  • RSS parser script [NodeBB]

    Customisation nodebb rss script
    47
    9 Votes
    47 Posts
    22k Views
    @phenomlab said in RSS parser script [NodeBB]: @jac Not yet. Sorry. Have some other work commitments I need to prioritise. Hoping to get to this over the weekend. No worries at all mate, thanks
  • WordPress & NodeBB

    Solved WordPress
    6
    0 Votes
    6 Posts
    3k Views
    @jac That won’t matter. You just redirect at nginx or apache level and it’ll work. The generally accepted standard though is to use a subdomain.