Skip to content
Sudonix

restarting nodebb on boot

Unsolved Configure
3 2 1.9k 1
  • Panda
    Panda
    Panda
    wrote on
    #1

    I have asked this question on the nodebb forum but still very confused, if I may also take opinions here.
    In a power cut or glitch my server may restart. What is the best way to make nodebb forum come back up without doing manual start?
    I was looking at nodemon which I understand, but the nodebb docs suggest a method of adding somethings to a systemd file !
    Its more complicated, is it a better method or can I just run nodebb under nodemon for auto restarts?

    phenomlab 2 Replies
    0
  • Panda Panda

    I have asked this question on the nodebb forum but still very confused, if I may also take opinions here.
    In a power cut or glitch my server may restart. What is the best way to make nodebb forum come back up without doing manual start?
    I was looking at nodemon which I understand, but the nodebb docs suggest a method of adding somethings to a systemd file !
    Its more complicated, is it a better method or can I just run nodebb under nodemon for auto restarts?

    phenomlab
    phenomlab
    phenomlab
    wrote on
    #2

    @eeeee Have you seen / read the below?

    https://docs.nodebb.org/configuring/running/

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Gratmore Ltd

    0
  • Panda Panda

    I have asked this question on the nodebb forum but still very confused, if I may also take opinions here.
    In a power cut or glitch my server may restart. What is the best way to make nodebb forum come back up without doing manual start?
    I was looking at nodemon which I understand, but the nodebb docs suggest a method of adding somethings to a systemd file !
    Its more complicated, is it a better method or can I just run nodebb under nodemon for auto restarts?

    phenomlab
    phenomlab
    phenomlab
    wrote on
    #3

    @eeeee said in restarting nodebb on boot:

    can I just run nodebb under nodemon for auto restarts?

    It’s a better method. Nodemon just looks for file system changes and would effectively die if the server was rebooted meaning you’d have to start it again anyway. Systemd is the defacto standard which is how the operating system interacts in terms of services, scheduled tasks etc.

    Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Gratmore Ltd

    1
Log in to reply

Related Topics
  • DownPW

    [NodeBB] Focus Mode : simply immersive reading for NodeBB

    Customisation focus mode nodebb javascript css
    1
    2 Votes
    1 Posts
    648 Views
    No one has replied
  • Panda

    Nodebb design

    Solved General nodebb
    2
    1 Votes
    2 Posts
    1k Views
    phenomlab
    @Panda said in Nodebb design: One negative is not being so good for SEO as more Server side rendered forums, if web crawlers dont run the JS to read the forum. From recollection, Google and Bing have the capability to read and process JS, although it’s not in the same manner as a physical person will consume content on a page. It will be seen as plain text, but will be indexed. However, it’s important to note that Yandex and Baidu will not render JS, although seeing as Google has a 90% share of the content available on the web in terms of indexing, this isn’t something you’ll likely lose sleep over. @Panda said in Nodebb design: The “write api” is preferred for server-to-server interactions. This is mostly based around overall security - you won’t typically want a client machine changing database elements or altering data. This is why you have “client-side” which could be DOM manipulation etc, and “server-side” which performs more complex operations as it can communicate directly with the database whereas the client cannot (and if it can, then you have a serious security flaw). Reading from the API is perfectly acceptable on the client-side, but not being able to write. A paradigm here would be something like SNMP. This protocol exists as a UDP (UDP is very efficient, as it is “fire and forget” and does not wait for a response like TCP does) based service which reads performance data from a remote source, thus enabling an application to parse that data for use in a monitoring application. In all cases, SNMP access should be “RO” (Read Only) and not RW (Read Write). It is completely feasible to assume complete control over a firewall for example by having RW access to SNMP and then exposing it to the entire internet with a weak passphrase. You wouldn’t do it (at least, I hope you wouldn’t) and the same ethic applies to server-side rendering and the execution of commands.
  • dave1904

    Collapsing blockquotes on Harmony

    General nodebb harmony collapsible quotes
    2
    1
    2 Votes
    2 Posts
    987 Views
    phenomlab
    @dave1904 that’s a really good point actually. I know it was there previously on Persona, but you’re right - no such function exists on harmony. However, putting something in place to mimick the behaviour of Persona won’t be hard from the js standpoint, although I wonder if perhaps we should ask the NodeBB developers is this feature was overlooked?
  • mventures

    NodeBB: Upgrading to NodeBB v3.x

    Solved Configure nodebb v3.x
    6
    0 Votes
    6 Posts
    3k Views
    phenomlab
    @mventures You’d need to connect to the server and execute it directly - not on your local terminal. Review the guide below, which will show you how to gain access via SSH to your server https://docs.ovh.com/gb/en/dedicated/ssh-introduction/ Once you have access, you’ll need to navigate to the actual folder where NodeBB is installed You’ll then need to change to the directory as shown below /home/unbuntu/nodebb [image: fdffe673-bf63-4b6d-a728-5506fddc1aff-image.png] In most cases, initial access takes you to the root of the file system. You can always issue pwd in a Linux terminal which will show you the Present Working Directory. From there, you can issue the command cd /home/ubuntu/nodebb Once in the NodeBB directory, you’d use the below commands ./nodebb stop git fetch && git checkout develop && git reset --hard origin/develop ./nodebb upgrade ./nodebb start Line 1 stops the NodeBB instance Line 2 gets the latest files from GIT (repository) and then checks out the development branch. It then resets the version you are using to the development branch ready for v3 Line 3 Runs the upgrade once the new branch is set, and code pulled Line 4 Restarts the NodeBB instance after the upgrade has completed Note that when you restart NodeBB and log back in, things will look very different to what you had in v2.
  • mventures

    NodeBB: Privileges for the Announcement channel

    Solved Configure nodebb
    6
    1
    1 Votes
    6 Posts
    2k Views
    phenomlab
    Up to you really
  • phenomlab

    Setting up a beta NodeBB v3 environment

    Moved Let's Build It nodebb upgrades beta1
    14
    3
    11 Votes
    14 Posts
    6k Views
    phenomlab
    @dave1904 excellent news. Thanks for the feedback
  • cagatay

    Upgrade Problem from 2.8.3 to 2.8.4

    Solved Configure nodebb
    35
    1
    8 Votes
    35 Posts
    12k Views
    phenomlab
    @cagatay No, you can ignore that.
  • crazycells

    Custom badges

    Solved Customisation nodebb
    103
    2
    49 Votes
    103 Posts
    62k Views
    DownPW
    Perfect