how to prevent DDoS attacks ?
-
@phenomlab they have firewall but we have to input individual rules, there is no country block.
Additionally, we use UFW and we only allow https.
@crazycells In addition, if you are using Virtualmin, you can leverage Fail2Ban which is a lot more powerful.
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells In addition, if you are using Virtualmin, you can leverage Fail2Ban which is a lot more powerful.
@phenomlab yes, we do have fail2ban set up already, sorry I wrote in the first post, but I did not write the usual way
Fail2Ban -
@phenomlab yes, we do have fail2ban set up already, sorry I wrote in the first post, but I did not write the usual way
Fail2Ban@crazycells There is also a way to do this with
fail2banusinghttps://blog.reinhard.codes/2023/04/02/restricting-access-to-ssh-using-fail2ban-and-geoip/
Obviously, you substitute port 22 (SSH) for port 443 (HTTPS)
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells There is also a way to do this with
fail2banusinghttps://blog.reinhard.codes/2023/04/02/restricting-access-to-ssh-using-fail2ban-and-geoip/
Obviously, you substitute port 22 (SSH) for port 443 (HTTPS)
@phenomlab can I ask your values of these settings?
-
@phenomlab can I ask your values of these settings?
@crazycells I’d leave those as they are and handle this much further upstream (at NGINX or OS level)
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells I’d leave those as they are and handle this much further upstream (at NGINX or OS level)
@phenomlab we already have those settings changed before, so it might help if I know the default values…
I guess you have them unchanged? Can I learn those default values? -
@phenomlab we already have those settings changed before, so it might help if I know the default values…
I guess you have them unchanged? Can I learn those default values?@crazycells Of course - see below
-
maybe we should switch to aws, it has a shield for ddos protection…
https://aws.amazon.com/shield/ddos-attack-protection/
which provider do you think is best against ddos attacks?
-
maybe we should switch to aws, it has a shield for ddos protection…
https://aws.amazon.com/shield/ddos-attack-protection/
which provider do you think is best against ddos attacks?
@crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free…
EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free…
EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US
@phenomlab sure, please send me your link. we were considering aws quite some time, but I will send your link to our developer as well, so he can make decision.
in general, we were trying to stay away from europe or european products due to strict laws and requirements. our user base is either from the US or from Turkey, so we prefer to decrease the amount of work we do
-
@crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free…
EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US
@phenomlab oh I see a link there now, but I believe that is not referral link?
-
@phenomlab sure, please send me your link. we were considering aws quite some time, but I will send your link to our developer as well, so he can make decision.
in general, we were trying to stay away from europe or european products due to strict laws and requirements. our user base is either from the US or from Turkey, so we prefer to decrease the amount of work we do
@crazycells You’d be better placed with Hetzner in the US I think. AWS can get VERY expensive very quickly. My referral link for Hetzner is below.
I personally use Hetzner and also have a “storage box” with 1Tb of storage for backups located in another datacentre for recovery purposes.
-
This might also be useful…
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?
-
@phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?
@crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.
@phenomlab yes, we are planning to install Cloudflare again…
We will go with “Pro” version and see how it works, I guess this should help not to have any session errors… Previously, we got many connection problems because of Cloudflare…
-
@phenomlab yes, we are planning to install Cloudflare again…
We will go with “Pro” version and see how it works, I guess this should help not to have any session errors… Previously, we got many connection problems because of Cloudflare…
@crazycells I wouldn’t be so sure. The pro version of Cloudflare is $20 per month but I don’t think that will resolve the connectivity issues.
There also the harm that CF causes to SEO if you use their bot fight mode as I mention here
https://sudonix.org/topic/503/cloudflare-bot-fight-mode-and-google-search
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
-
@crazycells I wouldn’t be so sure. The pro version of Cloudflare is $20 per month but I don’t think that will resolve the connectivity issues.
There also the harm that CF causes to SEO if you use their bot fight mode as I mention here
https://sudonix.org/topic/503/cloudflare-bot-fight-mode-and-google-search
@phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.
As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!
Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…
-
@phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.
As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!
Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…
@crazycells well, of course 1 billion+ requests happened after we installed CF, I do not know how many more we had before installing CF…
-
@phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.
As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!
Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…
@crazycells Good news in the short term, but interested to see if this does impact the SEO of your forum. Do you have Bot Fight Mode enabled in CF?
Mark Cutting also advises organisations as a Fractional CIO, Fractional CISO and Executive Advisor, helping boards improve technology governance, cyber resilience and executive decision making. Learn more at Phenomlab Ltd
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginDid this solution help you?
Related Topics
-
-
Smart Widgets
Solved Configure -
restarting nodebb on boot
Unsolved Configure -
Podcast Share NodeBB
Solved Configure -
NodeBB 1.19.3
Solved Performance -
-
-
