Skip to content

SSl expired on virtualmin

Solved Configure

Did this solution help you?
Did you find the suggested solution useful? Why not buy me a coffee? It's a nice gesture, and a great way to show your appreciation 💗

Related Topics
  • 0 Votes
    4 Posts
    678 Views

    @DownPW 🙂 most of this really depends on your desired security model. In all cases with firewalls, less is always more, although it’s never as clear cut as that, and there are always bespoke ports you’ll need to open periodically.

    Heztner’s DDoS protection is superior, and I know they have invested a lot of time, effort, and money into making it extremely effective. However, if you consider that the largest ever DDoS attack hit Cloudflare at 71m rps (and they were able to deflect it), and each attack can last anywhere between 8-24 hours which really depends on how determined the attacker(s) is/are, you can never be fully prepared - nor can you trace it’s true origin.

    DDoS attacks by their nature (Distributed Denial of Service) are conducted by large numbers of devices whom have become part of a “bot army” - and in most cases, the owners of these devices are blissfully unaware that they have been attacked and are under command and control from a nefarious resource. Given that the attacks originate from multiple sources, this allows the real attacker to observe from a distance whilst concealing their own identity and origin in the process.

    If you consider the desired effect of DDoS, it is not an attempt to access ports that are typically closed, but to flood (and eventually overwhelm) the target (such as a website) with millions of requests per second in an attempt to force it offline. Victims of DDoS attacks are often financial services for example, with either extortion or financial gain being the primary objective - in other words, pay for the originator to stop the attack.

    It’s even possible to get DDoS as a service these days - with a credit card, a few clicks of a mouse and a target IP, you can have your own proxy campaign running in minutes which typically involves “booters” or “stressers” - see below for more

    https://heimdalsecurity.com/blog/ddos-as-a-service-attacks-what-are-they-and-how-do-they-work

    @DownPW said in Setting for high load and prevent DDoS (sysctl, iptables, crowdsec or other):

    in short if you have any advice to give to secure the best.

    It’s not just about DDos or firewalls. There are a number of vulnerabilities on all systems that if not patched, will expose that same system to exploit. One of my favourite online testers which does a lot more than most basic ones is below

    https://www.immuniweb.com/websec/

    I’d start with the findings reported here and use that to branch outwards.

  • Virtualmin Setup DigitalOcean

    Solved Customisation
    26
    9 Votes
    26 Posts
    2k Views

    @Hari said in Virtualmin Setup DigitalOcean:

    i have felt it is very hard to manage Virtualmin the settings are confusing

    It’s a bit of a learning curve, admittedly, but very powerful and easy to use provided you understand the implications of what you are doing. For example, moving a VirtualMin server to subserver and then back again without changing underlying components that rely on the correct placement of the server, of course it will no longer work.

  • how to use CF tunnels with Virtualmin?

    Solved Configure
    10
    3 Votes
    10 Posts
    1k Views

    @Hari DDoS protection is not just a switch, or one component. It’s a collection of different and often disparate technologies that when grouped together form the basis of a combined toolset that can be used in defence.

    Typically these consist of IDS (Instrusion Detection System) and IPS (Intrusion Prevention System) components that detect irregularities in network traffic, and will take decisive action based on predefined rulesets, or in the case of more modern systems, AI and ML.

    Traditional “traffic shaping” technology is also deployed, so if an attack cannot be easily identified as malicious, the bandwidth available to that connection is severely limited to nothing more than a trickle rather than a full flow.

    Years ago, ISP’s used traffic shaping (also called “policers”) as an effective means of stopping applications such as BearShare, eDonkey, Napster, and other P2P based sharing systems from functioning correctly - essentially reducing the “appeal” of distributing and seeding illegal downloads. This was essentially the ISP’s way of saying “stop what you are doing please” without actually pulling the plug.

    These days, DDoS attacks are designed to overwhelm - not assume control of - webservers and other public facing components. It’s rare for small entities to be attacked unless there is some form of political agenda driven by your site or product. A classic example is governmental institutions or lawmakers who effectively are classed as “enforcers” and those who disagree are effectively making a statement in the form of Denial of Service.

    DDoS protection is effectively the responsibility of the hosting provider, but you shouldn’t just assume that they will protect you or your site. Their responsibility stops at their infrastructure, so it’s then up to you too decide how you full the gap in between your host and the website.

    Typically, you’d leverage something like Imunify360 which you can get for Plesk (and something I’d strongly recommend) but it’s not free, and is a paid (not expensive per month) subscription. If you want to use VirtualMin then there are a variety of tools readily available out of the box such as firewalls and fail2ban.

  • speed up my DigitalOcean droplet - Virtualmin

    Solved Configure
    10
    4 Votes
    10 Posts
    744 Views

    @phenomlab thanks for sharing, after four or five months I will migrate to DO 2 or 4gb RAM droplet. 👍

  • IRC Server/Client - Chat App with NodeBB

    Linux
    6
    1 Votes
    6 Posts
    698 Views

    @Hari not sure from the consumer perspective, but Skype has been all but completely consumed by Microsoft Teams when it comes to business usage.

  • nginx can't start again

    Moved Solved Configure
    20
    2 Votes
    20 Posts
    1k Views

    @elhana-fine Yes that will happen of of course if you still choose to restart the NGINX service after making a change and the test fails. The test on it’s own will state the error and the line number allowing you to fix that first 🙂

  • Email issue (virturalmin)

    Solved Hosting
    5
    0 Votes
    5 Posts
    416 Views

    @gotwf said in Email issue (virturalmin):

    @jac Typically you want your domain’s MX records to point to FQDN server name, e.g. foo.example.eg

    % drill stockportcounty.fans mx ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 63911 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; stockportcounty.fans. IN MX ;; ANSWER SECTION: stockportcounty.fans. 600 IN MX 10 stockportcounty.fans.

    Yours do not. Although a bit more drillin’ and reverse lookup indicates thusly;

    % drill stockportcounty.fans ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 160 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; stockportcounty.fans. IN A ;; ANSWER SECTION: stockportcounty.fans. 600 IN A 65.108.63.35 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 127 msec ;; SERVER: 204.8.232.207 ;; WHEN: Sun Oct 10 19:37:02 2021 ;; MSG SIZE rcvd: 54 <kvg@loon:~>% drill -x 65.108.63.35 ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 57802 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; 35.63.108.65.in-addr.arpa. IN PTR ;; ANSWER SECTION: 35.63.108.65.in-addr.arpa. 86400 IN PTR vps.stockportcounty.fans.

    I think you probably want your mx record to point to vps.stockportcountry.fans.

    It is important for forward and reverse lookups for MX records jive. Maybe you are looking like a spammer in that they do not?

    Edit: But at least you have a reverse record, many spammers do not, so that is a big red flag.

    Thanks for the advice, will look into it all later once back home.

  • SASL LOGIN authentication failed: generic failure

    Moved Solved Linux
    5
    0 Votes
    5 Posts
    1k Views

    @Ash3T I’m going to mark this post as solved as I’ve not heard from you in a while. Let me know if this isn’t the case and you need more help.