Virgin Media Broadband

[phenomlab]

@jac you’d still need the powerline adapters plus a network cable at each end for the router to be able to work, but not the Virgin booster, no.

[JAC]

@phenomlab said in Virgin Media Broadband:

@jac you’d still need the powerline adapters plus a network cable at each end for the router to be able to work, but not the Virgin booster, no.

Thanks mate, looking forward to sorting this .

[RiekMedia]

This is my Speedcheck

Business line with fixed ip

[phenomlab]

@riekmedia Nice ! I get speeds 350Mbps with my line and it’s residential !

[RiekMedia]

@phenomlab said in Virgin Media Broadband:

350Mbps

I could have 1000Mbits down and 500Mbit up… but what do you need it for at home. For me the upload was important and the fixed ip because of my servers that are at home Synology

[phenomlab]

@riekmedia Completely agree. I do work from home though, so the speed definitely helps.

[JAC]

@riekmedia said in Virgin Media Broadband:

This is my Speedcheck

Business line with fixed ip

Wow, nice!

[JAC]

Looking to purchase these later

[JAC]

Purchased

[JAC]

@jac said in Virgin Media Broadband:

Purchased

It’s here.

Awaiting the boosters and then I’ll set up, or doesn’t that matter too much?

[phenomlab]

@jac If you have the router then you can use the existing powerline adapters you have - you don’t need boosters.

[JAC]

@phenomlab Also purchased these as recommended above…

https://www.ebay.co.uk/itm/TP-Link-TL-PA411KIT-600Mbps-Nano-Powerline-Ethernet-Adapter-Home-Plug-Twin-Pack-/272237603311?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

[phenomlab]

@jac Ah, yes - I remember now. Sorry

[JAC]

@phenomlab will these still be ok?

[phenomlab]

@jac yes, they’ll be fine.

[JAC]

@phenomlab Thanks mate,

Just out of interest as I’ll be doing it later, how easy is it to set the router up?

[phenomlab]

@jac Quite easy - it should just work straight out of the box provided you take the connection from the powerline adapters and place the other end of the lead into the “WAN” interface on the new router.

There will be some setup involved as you need to access the router to setup the SSID etc.

[JAC]

@phenomlab So basically the booster that’s plugged in take the lead out of that and place it into one of the new ones? And then set up the router? Pretty sure you login and edit the settings?

[JAC]

@jac or am I getting it wrong? This isn’t to replace the box? This is just purely to boost it? Am I wrong? Apologies if so .

[JAC]

@jac hopefully there are some videos on YouTube .