Skip to content

WordPress site

General
118 3 63.6k 1
  • JAC JAC

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac For the time being, I’ve put the site into maintenance mode

    c9d82149-66eb-422b-9593-00020c0853e1-image.png

    Gives you enough time to work on backups etc.

    So in order to perform a backup, is it a snapshot I need to do via Hetzner CP?

    IMG_20220207_193749.jpg

    I think last time a snapshot was done, but of course this time I need a full backup 👍🏻

    wrote on last edited by
    #88

    @jac that will backup the entire machine, so if you decide to use the server for something else (and I’m guessing this is going to be the case) and then you decide you need the files or database from that snapshot, you’ll need to recover it into another instance.

    This isn’t the optimum way. It’s better to backup the database and the files individually.

  • @jac that will backup the entire machine, so if you decide to use the server for something else (and I’m guessing this is going to be the case) and then you decide you need the files or database from that snapshot, you’ll need to recover it into another instance.

    This isn’t the optimum way. It’s better to backup the database and the files individually.

    wrote on last edited by
    #89

    @phenomlab said in WordPress site:

    @jac that will backup the entire machine, so if you decide to use the server for something else (and I’m guessing this is going to be the case) and then you decide you need the files or database from that snapshot, you’ll need to recover it into another instance.

    This isn’t the optimum way. It’s better to backup the database and the files individually.

    Thanks mate. Is that via FTP?

  • JAC JAC

    @phenomlab said in WordPress site:

    @jac that will backup the entire machine, so if you decide to use the server for something else (and I’m guessing this is going to be the case) and then you decide you need the files or database from that snapshot, you’ll need to recover it into another instance.

    This isn’t the optimum way. It’s better to backup the database and the files individually.

    Thanks mate. Is that via FTP?

    wrote on last edited by
    #90

    @jac yes, or better, via VirtualMin

  • @jac yes, or better, via VirtualMin

    wrote on last edited by
    #91

    @phenomlab said in WordPress site:

    @jac yes, or better, via VirtualMin

    Thanks mate. I’ll do this tomorrow. Ideally save the files to a zip file?

  • JAC JAC

    @phenomlab said in WordPress site:

    @jac yes, or better, via VirtualMin

    Thanks mate. I’ll do this tomorrow. Ideally save the files to a zip file?

    wrote on last edited by
    #92

    @jac you’ll need a script to backup the database as this won’t be included in the files by default.

  • @jac you’ll need a script to backup the database as this won’t be included in the files by default.

    wrote on last edited by
    #93

    @phenomlab said in WordPress site:

    @jac you’ll need a script to backup the database as this won’t be included in the files by default.

    I see mate, unfortunately you’ve lost me there, I do apologise. I’m sure tomorrow I can achieve this.

  • JAC JAC

    @phenomlab said in WordPress site:

    @jac you’ll need a script to backup the database as this won’t be included in the files by default.

    I see mate, unfortunately you’ve lost me there, I do apologise. I’m sure tomorrow I can achieve this.

    wrote on last edited by
    #94

    @jac I can help you of course.

  • @jac I can help you of course.

    wrote on last edited by
    #95

    @phenomlab said in WordPress site:

    @jac I can help you of course.

    Many thanks Mark!

    Happy to proceed… 👍🏻

  • JAC JAC

    @phenomlab said in WordPress site:

    @jac I can help you of course.

    Many thanks Mark!

    Happy to proceed… 👍🏻

    wrote on last edited by
    #96

    @jac Final DB backup completed

    1ccd1bde-fc4c-44b6-b0cc-dd1373d4a63d-image.png

    I’ve also created a bundled archive of the entire site - all files, folders, and database, located here

    7e1d27c0-a2c9-4fdb-be54-9f6ab87d6f3d-image.png

    You should download this file for backup and storage purposes (right-click the file and then you can download it)

    6f7b9fd0-3326-4d97-ba25-8ccd9e60d8b0-image.png

    The server can remain as is - unless you are looking to shut that down altogether which kind of defeats the object if you want to continue with another project and domain. I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

  • @jac Final DB backup completed

    1ccd1bde-fc4c-44b6-b0cc-dd1373d4a63d-image.png

    I’ve also created a bundled archive of the entire site - all files, folders, and database, located here

    7e1d27c0-a2c9-4fdb-be54-9f6ab87d6f3d-image.png

    You should download this file for backup and storage purposes (right-click the file and then you can download it)

    6f7b9fd0-3326-4d97-ba25-8ccd9e60d8b0-image.png

    The server can remain as is - unless you are looking to shut that down altogether which kind of defeats the object if you want to continue with another project and domain. I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    wrote on last edited by
    #97

    @phenomlab said in WordPress site:

    You should download this file for backup and storage purposes (right-click the file and then you can download it)

    Done ✔

  • @jac Final DB backup completed

    1ccd1bde-fc4c-44b6-b0cc-dd1373d4a63d-image.png

    I’ve also created a bundled archive of the entire site - all files, folders, and database, located here

    7e1d27c0-a2c9-4fdb-be54-9f6ab87d6f3d-image.png

    You should download this file for backup and storage purposes (right-click the file and then you can download it)

    6f7b9fd0-3326-4d97-ba25-8ccd9e60d8b0-image.png

    The server can remain as is - unless you are looking to shut that down altogether which kind of defeats the object if you want to continue with another project and domain. I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    wrote on last edited by
    #98

    @phenomlab said in WordPress site:

    I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    Thank you very much Mark, just checking this now.

    I don’t think there are any backups made, but I’ll check now.

  • JAC JAC

    @phenomlab said in WordPress site:

    I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    Thank you very much Mark, just checking this now.

    I don’t think there are any backups made, but I’ll check now.

    wrote on last edited by
    #99

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    Thank you very much Mark, just checking this now.

    I don’t think there are any backups made, but I’ll check now.

    There is a snapshot but no backup.

    Screenshot 2022-02-08 at 11-19-42 Snapshots · Hetzner Cloud.png Screenshot 2022-02-08 at 11-19-53 Backups · Hetzner Cloud.png

  • JAC JAC

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    I personally would take a snapshot of the server, and also check the backup status - from memory, I set this to backup each night and if that is the case, you’re good to go once you’ve downloaded the .tar.gz file (which can be opened with 7Zip by the way)

    Thank you very much Mark, just checking this now.

    I don’t think there are any backups made, but I’ll check now.

    There is a snapshot but no backup.

    Screenshot 2022-02-08 at 11-19-42 Snapshots · Hetzner Cloud.png Screenshot 2022-02-08 at 11-19-53 Backups · Hetzner Cloud.png

    wrote on last edited by

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

  • @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    wrote on last edited by

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

  • JAC JAC

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    wrote on last edited by

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    What I’m saying is if I won’t be using it I don’t want to pay for it 😉 😉 .

    As in realistically my County forum is finished unfortunately.

  • JAC JAC

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    What I’m saying is if I won’t be using it I don’t want to pay for it 😉 😉 .

    As in realistically my County forum is finished unfortunately.

    wrote on last edited by

    @jac said in WordPress site:

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    What I’m saying is if I won’t be using it I don’t want to pay for it 😉 😉 .

    As in realistically my County forum is finished unfortunately.

    Would that not be the same as the backup I downloaded?

  • JAC JAC

    @jac said in WordPress site:

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    What I’m saying is if I won’t be using it I don’t want to pay for it 😉 😉 .

    As in realistically my County forum is finished unfortunately.

    Would that not be the same as the backup I downloaded?

    wrote on last edited by

    @jac If you don’t want to pay for it anymore, then you’ll need to power off and delete the instance also. Hetzner will still charge you for a powered-off instance, and the only way to stop that charge is to delete.

  • JAC JAC

    @jac said in WordPress site:

    @jac said in WordPress site:

    @phenomlab said in WordPress site:

    @jac Let’s click “Enable Backups”. This way, you don’t need to worry about it, and they are very cheap.

    Even though it won’t be using that backup anymore?

    What I’m saying is if I won’t be using it I don’t want to pay for it 😉 😉 .

    As in realistically my County forum is finished unfortunately.

    Would that not be the same as the backup I downloaded?

    wrote on last edited by

    @jac No. This is just the backup for the domain itself. Backup at server level means you can recover the entire machine.

  • @jac If you don’t want to pay for it anymore, then you’ll need to power off and delete the instance also. Hetzner will still charge you for a powered-off instance, and the only way to stop that charge is to delete.

    wrote on last edited by

    @phenomlab said in WordPress site:

    If you don’t want to pay for it anymore, then you’ll need to power off and delete the instance also. Hetzner will still charge you for a powered-off instance, and the only way to stop that charge is to delete.

    I understand mate…

    That may be the best option until I come up with something else, do you think?

  • @jac No. This is just the backup for the domain itself. Backup at server level means you can recover the entire machine.

    wrote on last edited by

    @phenomlab said in WordPress site:

    No. This is just the backup for the domain itself. Backup at server level means you can recover the entire machine.

    Ah I see. thanks Mark 🙂 .


Related Topics
  • Nodebb vs Wordpress vs Other

    General wordpress nodebb woocomerce business
    4
    5 Votes
    4 Posts
    2k Views
    DownPW
    PrestaShop + modules IA https://www.prestashop.com Magento https://developer.adobe.com/open/magento
  • How to deploy WordPress.org Developer theme

    Solved Configure wordpress theme github
    4
    1 Votes
    4 Posts
    3k Views
    phenomlab
    @Hari the real issue here is that I don’t think it can be used as a theme for WordPress because of the dependencies it clearly has, including its own Web server. My view here is that this is designed to be a complete development environment outside of the WordPress core.
  • WP / Woocommerce Mystery

    Solved Configure wordpress
    23
    1
    12 Votes
    23 Posts
    11k Views
    phenomlab
    @Panda said in WP / Woocommerce Mystery: Just back to my other question, have you ever used Shopify? It insists on a templating language to use any custom js. Not personally as never had any need, however, I do know that it uses Liquid for JS templating. It’s written in Ruby and is used to generate dynamic content on shop fronts. There’s zero reason as to why it wouldn’t work with data supplied by 3rd party API’s, although WordPress code won’t natively work for obvious reasons, and as such, this code would need to be re-written. The JS part will likely work with minor modification, but not the PHP file in it’s current form.
  • How to fix no img attribute from this code

    Solved WordPress wordpress
    7
    1 Votes
    7 Posts
    2k Views
    Sala
    Yes, I am aware that if users are given the option to enter alt text, some may do so in an abusive manner. For the time being, we’ve adjusted the php script to generate the alt automatically, thus there are no longer any SEO problem with alt images.
  • Flarum - WordPress Journey

    WordPress flarum wordpress quitting
    59
    22 Votes
    59 Posts
    23k Views
    phenomlab
    @Sala I will likely need admin access to your site for this.
  • move out from flarum to wordpress

    WordPress wordpress flarum migration
    87
    52 Votes
    87 Posts
    47k Views
    phenomlab
    @Hari Glad to see this went so well, and that you’ve finally departed the Flarum ecosystem
  • Best Cloudflare settings for woo commerce

    Solved WordPress cloudflare wordpress woocommerce
    2
    1
    1 Votes
    2 Posts
    2k Views
    phenomlab
    @hari the cache level for woocommerce should always be bypass. Any caching of woocommerce will cause you serious issues and will result in the checkout process not functioning correctly. This does mean that the overall experience will be slower (depending on geographic location) although CF is known to cause significant issues hence the need to bypass. If you want to cache as much as possible, then set rules to bypass caching on the cart and account pages etc.
  • WordPress & NodeBB

    Solved WordPress
    6
    0 Votes
    6 Posts
    3k Views
    phenomlab
    @jac That won’t matter. You just redirect at nginx or apache level and it’ll work. The generally accepted standard though is to use a subdomain.