Virgin router replacement

[phenomlab]

@JAC Nope - no need because it is 1Gbps - if that were not the case, you’d struggle to get over 100Mbps on wired when you are getting 800+ without the VPN.

[phenomlab]

@JAC said in Virgin router replacement:

do you recommend these or the ones I have if I can find them will they be ok?

Either should be fine

[JAC]

@phenomlab I’ve found the pods, I have one ethernet cable that I used to get them speeds earlier. I have another coming tomorrow, then I can set up the powerline adapters .

[JAC]

@phenomlab said in Virgin router replacement:

Nope - no need because it is 1Gbps - if that were not the case, you’d struggle to get over 100Mbps on wired when you are getting 800+ without the VPN.

Thanks Mark for all the advice!

[phenomlab]

@JAC Anytime.

[JAC]

@phenomlab thank you!

Is it a case of plugin and play with the powerline adapters?

I don’t remember there being any settings to sort last time 🧐.

[phenomlab]

@JAC said in Virgin router replacement:

Is it a case of plugin and play with the powerline adapters?

Yes. You just need to press the “pair” button on both devices when plugged in and connected

[JAC]

@phenomlab brilliant, thank you!

I’ll be back in touch tomorrow when the other ethernet cable has arrived.

Many thanks again as always!

[JAC]

Ok… so the powerline adapters are plugged in and ready to go.

[JAC]

Testing with no VPN on…

Testing with VPN on

Not what I quite expected

[phenomlab]

@JAC Me neither. Which brand are these?

[JAC]

@phenomlab Tenda

[JAC]

{{MetaTags.og.title}}

{{MetaTags.og.description}}

NVIDIA

[phenomlab]

@JAC Is that adapter plugged into a surge protector or multi-strip? It looks like it is. Powerline adapters should not be connected in this way and should be the only thing in the socket - there’s too much interference otherwise!

[phenomlab]

@JAC Yes, you could turn off ACL (Access Control Lists) because you’ll probably not need them - try it

[JAC]

@phenomlab I understand, I don’t have a plug socket nearby unfortunately .

[JAC]

@phenomlab So I need to login to the settings and turn this off pal?

[phenomlab]

@JAC Yes.

[phenomlab]

@JAC Can you try it in another room that does have spare sockets? It would then rule out the powerline adapters - you obviously need to do the same downstairs where the hub is.

[JAC]

@phenomlab