Virgin Media Broadband

[JAC]

@phenomlab said in Virgin Media Broadband:

@jac yes, it’ll be fine

Ordered . Hopefully tomorrow night will go a little more smoothly .

I take I do the same steps?

[JAC]

@jac said in Virgin Media Broadband:

@phenomlab said in Virgin Media Broadband:

@jac yes, it’ll be fine

Ordered . Hopefully tomorrow night will go a little more smoothly .

I take I do the same steps?

Does it make more sense to use this as an extender then or as main hub?

[phenomlab]

@jac it’s going to be an access point in it’s own right. The virgin media hub is the main component and that’s not changed.

[JAC]

@phenomlab said in Virgin Media Broadband:

@jac it’s going to be an access point in it’s own right. The virgin media hub is the main component and that’s not changed.

Thanks mate, for the advice as always.

[JAC]

@jac said in Virgin Media Broadband:

Loading...

Please wait while the description loads.

Loading...

It’s arrived!

Looking to hopefully close this thread later

[JAC]

About to start this…

[JAC]

@jac

[JAC]

Ok mate if you’re available I may need some help for a few minutes if that’s ok?

So I plug the cable from the virgin box into the WAN port on the new router?

[phenomlab]

@jac No. Do the following

1. Plug one powerline adapter into the wall next to the Virgin Hub
2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
5. Power on the router (and powerline adapters if you haven’t already)

Let me know when you are finished with that

[JAC]

@phenomlab said in Virgin Media Broadband:

Plug the remaining powerline adapter into the wall in the room where you want the router to live

So this doesn’t need to be downstairs with the virgin router?

[phenomlab]

@jac No. You need one at the “Virgin End” and one at the “Router end” as I specified in the list above

[JAC]

@phenomlab said in Virgin Media Broadband:

Plug one powerline adapter into the wall next to the Virgin Hub
Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)

Done and done .

[phenomlab]

@jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

[phenomlab]

@jac said in Virgin Media Broadband:

Done and done .

Are steps 3, 4, and 5 complete ?

[JAC]

@phenomlab Thanks

[phenomlab]

@jac If you look at the green activity lights on the powerline adapters (in both rooms) you should see they are flashing?

[JAC]

@phenomlab said in Virgin Media Broadband:

@jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

I think it’s on the bottom of the box mate, will check.

[JAC]

@jac would this work in the next room or does it have to be in the main room?

[phenomlab]

@jac Yes, there’s a slide-out red tag that has the details on it (provided you haven’t previously removed it)

[phenomlab]

@jac said in Virgin Media Broadband:

would this work in the next room or does it have to be in the main room?

If you are referring to accessing the Virgin Media Hub, then it’ll work from anywhere provided you have an adequate Wifi connection