Skip to content

Fontawesome 5

Unsolved Customisation
14 2 4.9k 1
  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

  • What is the best approach to adding FA5 into a nodebb installation.

    Assuming i am doing it via Custom JS CP.

    @pwsincd are you looking to use the pro version or free ?

  • @pwsincd are you looking to use the pro version or free ?

    @phenomlab the free version

  • @phenomlab the free version

    @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

  • @pwsincd Here’s the steps to add

    1. Open the ACP, and go to Appearance -> Custom Header. Within the custom header, we need to add
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/css/all.min.css" integrity="sha512-1ycn6IcaQQ40/MKBW2W4Rhis/DbILU74C1vSrLJxCq57o941Ym01SwNsOMqvEBFlcgUa6xLiPY/NS5R+E6ztJQ==" crossorigin="anonymous" referrerpolicy="no-referrer" />
    

    It should look like the below. Don’t forget to add the DOCTYPE and <head> values before anything else.

    e4c19939-e079-4507-907b-d6de2e4a6202-image.png

    1. In the same location, we need to add
    <script src="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/5.15.4/js/all.min.js" integrity="sha512-Tn2m0TIpgVyTzzvmxLNuqbSJH3JP8jm+Cy3hvHrW7ndTDcJ1w5mBiksqDBb8GpE2ksktFvDB/ykZ0mDpsZj20w==" crossorigin="anonymous" referrerpolicy="no-referrer"></script>
    

    You should now have something like the below

    0aa95976-c73d-4737-9cc2-c7eae8ca9c69-image.png

    Ensure that both of the below are on

    beaa416f-fd89-45e2-80b4-ab561443934b-image.png

    Save the changes

    This will now pull the required CSS and JS from the CDN on each page load. When attempting to use the font itself, you will need to identify it with font-family, so for example

    .mytarget {
    font-family: "Font Awesome 5 Free";
    font-weight: 900;
    }
    

    Note that the free version only supports the solid icons, so it’s necessary to set the font-weight attribute.

    If you are looking to replace the existing icons, let me know as this requires additional configuration for it to work properly. This is something I do with a Pro subscription I have that Sudonix is using.

    @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

  • @phenomlab This is great , i think you included some info i was missing i was almost there … replacing the whole sites fonts would be cool , is that with some kind of shim?

    @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

  • @pwsincd No, you should be able to override all of them, but likely on a one-by-one basis. You could use the css class of * but this is complete overkill and will impact other fonts on the site as it covers every single class.

    @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd Can you share a URL where I can see this ? Over PM if you’d prefer 🙂

  • @phenomlab Capture.PNG

    adding the code you posted , instantly affects some icons with the default FontAwesome as you can see they are now ?

    @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

  • @pwsincd This doesn’t look right at all

    2a8e7877-7728-45de-9a8d-c1f4b0f0123b-image.png

    Can you give me admin access to this site so I can take a look at your config please ?

    Let me know if feasible, and I’ll create an account.

    @phenomlab did u make an account

  • @phenomlab did u make an account

    @pwsincd Just created one

  • @pwsincd Just created one

    @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd no problems. Just let me know.

  • @phenomlab ok i will have to get back to this … i will DM when i available… IRL calling.

    @pwsincd hi. Just following up on this thread (I know it’s old) but was curious to understand if it’s still an issue or not ?


Related Topics
  • What’s going on with NodeBB?

    Performance nodebb script die
    20
    8 Votes
    20 Posts
    4k Views
    @cagatay The most reliable way to upgrade Node.js on Ubuntu depends on how you originally installed it. Method 1: Using NVM (Recommended) If you already use Node Version Manager (NVM), upgrading is simple. NVM allows you to keep both versions and switch between them if needed. Install Node 22: nvm install 22 Switch to Node 22: nvm use 22 Set it as your default: nvm alias default 22 Verify the change: node -v Method 2: Using NodeSource (PPA) If you installed Node.js via apt using the NodeSource repository, you need to update the repository script to point to the new version. Remove the old NodeSource list (optional but cleaner): sudo rm /etc/apt/sources.list.d/nodesource.list Download and run the NodeSource setup script for Node 22: curl -fsSL [https://deb.nodesource.com/setup_22.x](https://deb.nodesource.com/setup_22.x) | sudo -E bash - Install/Upgrade Node.js: sudo apt-get install -y nodejs Verify the installation: node -v Method 3: Using the ‘n’ Package If you have npm installed, you can use the n interactive manager. Clear the npm cache: sudo npm cache clean -f Install the ‘n’ helper: sudo npm install -g n Install Node 22: sudo n 22 Update your shell: hash -r Troubleshooting Permission Denied: If you see permission errors using Method 2 or 3, ensure you are using sudo. Path Issues: If node -v still shows version 20 after upgrading via NVM, restart your terminal or run source ~/.bashrc. Conflicts: Avoid mixing these methods. If you switch from apt to nvm, it is best to sudo apt remove nodejs first to avoid path conflicts.
  • 15 Votes
    51 Posts
    24k Views
    Oh yes, that’s what’s super cool, I learn something every day. Afterwards I start from so low in JS
  • NodeBB: Consent page

    Solved Configure nodebb consent
    16
    4 Votes
    16 Posts
    6k Views
    @DownPW I still do not see any issues.
  • The best css to customize our logo?

    Solved Customisation css
    2
    1 Votes
    2 Posts
    3k Views
    @Sala This should look better .sidenav .navbar-brand { padding-top: 0.5rem; padding-bottom: 0.5rem; } [image: 1669026666905-e5cec20e-be36-4ee8-9129-fd11ad4656ac-image.png] You can increase the top and bottom padding by increasing the values above.
  • 9 Votes
    32 Posts
    14k Views
    @DownPW said in Bottom footer navbar button extend: Oh my god, it’s beautiful mark I liked this design so much, I’ve implemented it here. I intend to do a lot more with the footer in due course, so hiding it makes a lot of sense. Thanks @DownPW for the idea and initial concept
  • IRC Server/Client - Chat App with NodeBB

    Linux nodebb irc server client
    6
    1 Votes
    6 Posts
    3k Views
    @Hari not sure from the consumer perspective, but Skype has been all but completely consumed by Microsoft Teams when it comes to business usage.
  • NodeBB vs Discourse

    Chitchat nodebb discourse board
    25
    6 Votes
    25 Posts
    13k Views
    @phenomlab said in NodeBB vs Discourse: Hetzner eh ? I use them also. In fact, Sudonix is hosted in Nuremberg yes i’m also at hetzner, i have been a customer there for years with a reseller account for domains. My VPS that I host there are also in Nuremberg
  • RSS parser script [NodeBB]

    Customisation nodebb rss script
    47
    9 Votes
    47 Posts
    21k Views
    @phenomlab said in RSS parser script [NodeBB]: @jac Not yet. Sorry. Have some other work commitments I need to prioritise. Hoping to get to this over the weekend. No worries at all mate, thanks