installing flarum with plesk
-
@Hari the reason why you get that message is because the target directory isn’t empty. Remove all contents, and try again.
@phenomlab should i need to try to access from root or my domain directory?
how to check my plesk is using ngix or apache?
-
-
i have installed it but for some reason, DNS is not getting updated
flarumtest.tk i will check this later after 24hr
deleted old domain flatest.tk
-
i have installed it but for some reason, DNS is not getting updated
flarumtest.tk i will check this later after 24hr
deleted old domain flatest.tk
@Hari Flarum will 100% work on Plesk, but as I alluded to in a previous thread, it’s not a simple exercise. Installing Flarum using Pocket Hold isn’t necessary as you should be able to complete the entire installation process using SSH without issue.
Plesk will use Apache and also leverage NGINX as a reverse proxy. For some time, I ran a Flarum installation using Plesk, but it’s very limiting in the sense that you have very little control over NGINX itself.
-
@Hari Flarum will 100% work on Plesk, but as I alluded to in a previous thread, it’s not a simple exercise. Installing Flarum using Pocket Hold isn’t necessary as you should be able to complete the entire installation process using SSH without issue.
Plesk will use Apache and also leverage NGINX as a reverse proxy. For some time, I ran a Flarum installation using Plesk, but it’s very limiting in the sense that you have very little control over NGINX itself.
@phenomlab I completely agree, as i can see how complicated it is. i just want to test, explore and learn
it’s not detecting flarum i need to include flarum path, i did not understand earlier suggestions at the same time bit confused too, could you rephrase and tell me where can i go and do changes?
-
now i understood, the great plesk
index.htmlfile not letting to load the flarum after deleting it flarum got loaded without doing any Nginx or apache settings -
undefined Hari has marked this topic as solved on 22 Feb 2022, 01:25
-
undefined Hari has marked this topic as unsolved on 22 Feb 2022, 02:11
-
finally got it running but i am getting these errors how to fix them?
root@amazing-hellman:/var/www/vhosts/test.tk/httpdocs# php flarum info PHP Fatal error: Uncaught PDOException: could not find driver in /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDOConnection.php:40 Stack trace: #0 /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDOConnection.php(40): PDO->__construct() #1 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/Connector.php(67): Doctrine\DBAL\Driver\PDOConnection->__construct() #2 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/Connector.php(46): Illuminate\Database\Connectors\Connector->createPdoConnection() #3 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/MySqlConnector.php(24): Illuminate\Database\Connectors\Connector->createConnection() #4 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/ConnectionFactory.php(184): Illuminate\Database\Connectors\MySqlConnector->connect() #5 [internal function]: Illuminate\Database\Connectors\ConnectionFactory->Illuminate\Database\Connector in /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDO/Exception.php on line 18 root@amazing-hellman:/var/www/vhosts/test.tk/httpdocs# -
finally got it running but i am getting these errors how to fix them?
root@amazing-hellman:/var/www/vhosts/test.tk/httpdocs# php flarum info PHP Fatal error: Uncaught PDOException: could not find driver in /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDOConnection.php:40 Stack trace: #0 /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDOConnection.php(40): PDO->__construct() #1 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/Connector.php(67): Doctrine\DBAL\Driver\PDOConnection->__construct() #2 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/Connector.php(46): Illuminate\Database\Connectors\Connector->createPdoConnection() #3 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/MySqlConnector.php(24): Illuminate\Database\Connectors\Connector->createConnection() #4 /var/www/vhosts/test.tk/httpdocs/vendor/illuminate/database/Connectors/ConnectionFactory.php(184): Illuminate\Database\Connectors\MySqlConnector->connect() #5 [internal function]: Illuminate\Database\Connectors\ConnectionFactory->Illuminate\Database\Connector in /var/www/vhosts/test.tk/httpdocs/vendor/doctrine/dbal/lib/Doctrine/DBAL/Driver/PDO/Exception.php on line 18 root@amazing-hellman:/var/www/vhosts/test.tk/httpdocs#@Hari That looks like the
php-mysqlextension is not installed, or not loaded for the PHP version you are using. -
i want to learn these things
-
change PHP version to 8 at the server level and also for my domain in Plesk using SSH
-
instead of maria DB i want to use MySQL as default, how can i do that? is it really possible? without a docker or any other things (since i am getting those SQL errors as shown in the earlier reply want to switch to MySQL from MariaDB)
-
update composer to v2 for my domain via SSH.
@phenomlab said in installing flarum with plesk:
@Hari Flarum will 100% work on Plesk, but as I alluded to in a previous thread, it’s not a simple exercise. Installing Flarum using Pocket Hold isn’t necessary as you should be able to complete the entire installation process using SSH without issue.
i don’t know the reason but i am unable to install any extensions or flarum using SSH that is the reason i had to use pocket hold
-
-
undefined Hari has marked this topic as solved on 22 Feb 2022, 21:36
-
i want to learn these things
-
change PHP version to 8 at the server level and also for my domain in Plesk using SSH
-
instead of maria DB i want to use MySQL as default, how can i do that? is it really possible? without a docker or any other things (since i am getting those SQL errors as shown in the earlier reply want to switch to MySQL from MariaDB)
-
update composer to v2 for my domain via SSH.
@phenomlab said in installing flarum with plesk:
@Hari Flarum will 100% work on Plesk, but as I alluded to in a previous thread, it’s not a simple exercise. Installing Flarum using Pocket Hold isn’t necessary as you should be able to complete the entire installation process using SSH without issue.
i don’t know the reason but i am unable to install any extensions or flarum using SSH that is the reason i had to use pocket hold
@Hari My responses below
change PHP version to 8 at the server level and also for my domain in Plesk using SSH
PHP 8.x has been available in Plesk since October 2021. There’s no need to change this using SSH, and it’s actually not recommended. The entire point of Plesk is to manage this using the portal - see below
instead of maria DB i want to use MySQL as default, how can i do that? is it really possible? without a docker or any other things (since i am getting those SQL errors as shown in the earlier reply want to switch to MySQL from MariaDB)
Possible, yes - although it’s usually the other way round in the sense that people want to replace MySQL with MariaDB
update composer to v2 for my domain via SSH.
You should take the same route as is advertised here
-
-
@Hari My responses below
change PHP version to 8 at the server level and also for my domain in Plesk using SSH
PHP 8.x has been available in Plesk since October 2021. There’s no need to change this using SSH, and it’s actually not recommended. The entire point of Plesk is to manage this using the portal - see below
https://support.plesk.com/hc/en-us/articles/115000769793
instead of maria DB i want to use MySQL as default, how can i do that? is it really possible? without a docker or any other things (since i am getting those SQL errors as shown in the earlier reply want to switch to MySQL from MariaDB)
Possible, yes - although it’s usually the other way round in the sense that people want to replace MySQL with MariaDB
https://www.plesk.com/blog/product-technology/mysql-vs-mariadb/
update composer to v2 for my domain via SSH.
You should take the same route as is advertised here
@phenomlab oh i see in that case i think my old backup is causing the issues regarding MySQL and PHP versions. i will try fresh installation now.
-
@phenomlab oh i see in that case i think my old backup is causing the issues regarding MySQL and PHP versions. i will try fresh installation now.
@Hari Ok. Let me know.
-
i have installed and set my project settings to PHP 8 but CLI is not updating to 8.0
should i try this?
-
i have installed and set my project settings to PHP 8 but CLI is not updating to 8.0
should i try this?
https://talk.plesk.com/threads/set-default-php-version-for-command-line.345940/
@Hari What version of Plesk do you have ? You should be able to install this using the links I posted earlier ?
-
@Hari What version of Plesk do you have ? You should be able to install this using the links I posted earlier ?
-
@Hari What’s the output of
php -vfrom CLI ? -
i just sent logins, please teach me what changes i need to make i really want to learn this setup process … i want to do a youtube video on this too
-
i just sent logins, please teach me what changes i need to make i really want to learn this setup process … i want to do a youtube video on this too
@Hari Looks like the environment variable is not set.
What is the output of
locate phpandwhereis php? -
@Hari Looks like the environment variable is not set.
What is the output of
locate phpandwhereis php? -
@Hari No. Plesk typically installs PHP in
/opt/plesk/php/7.4/binso what is the output of/opt/plesk/php/7.4/bin/php -v?Should be
PHP 7.4.28 (cli) (built: Feb 18 2022 07:57:20) ( NTS ) Copyright (c) The PHP Group Zend Engine v3.4.0, Copyright (c) Zend Technologies with the ionCube PHP Loader + ionCube24 v11.0.1, Copyright (c) 2002-2022, by ionCube Ltd. with Zend OPcache v7.4.28, Copyright (c), by Zend Technologies Therefore, PHP 8 should be in
/opt/plesk/php/8.0/bin, so you should also get output from/opt/plesk/php/8.0/bin/php -vas belowPHP 8.0.16 (cli) (built: Feb 18 2022 07:57:20) ( NTS ) Copyright (c) The PHP Group Zend Engine v4.0.16, Copyright (c) Zend Technologies with Zend OPcache v8.0.16, Copyright (c), by Zend Technologies This means that because your environment variable is missing, you have to specify the full path to PHP 8, so instead of just
php, you need/opt/plesk/php/8.0/bin/phpWelcome to Plesk
Did this solution help you?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (ether email, or push notification). You'll also be able to save bookmarks, use reactions, and upvote to show your appreciation to other community members.
With your input, this post could be even better 💗
RegisterLog in
